lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/13] scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails
Date
From: Luo Jiaxing <luojiaxing@huawei.com>

At expander environment, we delay after issue phy reset to wait for
hardware to handle phy reset. But if sas_smp_phy_control() fails, the
delay is unnecessary so remove it.

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 5642c53cccae..247268983df9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1791,9 +1791,10 @@ static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device)
} else if (sas_dev->dev_status != HISI_SAS_DEV_INIT) {
/*
* If in init state, we rely on caller to wait for link to be
- * ready; otherwise, delay.
+ * ready; otherwise, except phy reset is fail, delay.
*/
- msleep(2000);
+ if (!rc)
+ msleep(2000);
}

return rc;
--
2.17.1
\
 
 \ /
  Last update: 2019-09-06 14:59    [W:0.056 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site