[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[RFC 0/2] Add Support for SDHC bus bandwidth voting
Vote for the MSM bus bandwidth required by SDHC driver
based on the clock speed and bus width of the card. Otherwise,
the system clocks may run at minimum clock speed and
thus affecting the performance.

Adapt to the new ICB framework for bus bandwidth voting.

This requires the source/destination port ids.
Also this requires a tuple of values.

The tuple is for two different paths - from SDHC master
to BIMC slave. The other is from CPU master to SDHC slave.
This tuple consists of the average and peak bandwidth.

This change is based on Georgi Djakov [RFC]

Pradeep P V K (2):
mmc: sdhci-msm: Add support for bus bandwidth voting
dt-bindings: mmc: sdhci-msm: Add Bus BW vote supported strings

.../devicetree/bindings/mmc/sdhci-msm.txt | 32 ++
drivers/mmc/host/sdhci-msm.c | 393 ++++++++++++++++++++-
2 files changed, 422 insertions(+), 3 deletions(-)


 \ /
  Last update: 2019-09-06 14:54    [W:0.104 / U:5.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site