lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: meson: sm1: set gpio interrupt controller compatible
Date
On Thu 05 Sep 2019 at 13:40, Kevin Hilman <khilman@baylibre.com> wrote:

> Jerome Brunet <jbrunet@baylibre.com> writes:
>
>> Set the appropriate gpio interrupt controller compatible for the
>> sm1 SoC family. This newer version of the controller can now
>> trig irq on both edge of the input signal
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>
> Queued.
>
> I may do a late round for the dev cycle of v5.4, otherwise this will go
> for v5.5.

No problem

> If it goes for v5.5, it should probably have a Fixes tag, no?

Maybe, but then every change to meson-sm1.dtsi would be some kind of fix
on what is provided by meson-g12-common.dtsi.

Not sure this really qualify as a fix but I'll do as you prefer, just
let me know


>
> Kevin
>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
>> index 521573f3a5ba..6152e928aef2 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
>> @@ -134,6 +134,11 @@
>> power-domains = <&pwrc PWRC_SM1_ETH_ID>;
>> };
>>
>> +&gpio_intc {
>> + compatible = "amlogic,meson-sm1-gpio-intc",
>> + "amlogic,meson-gpio-intc";
>> +};
>> +
>> &pwrc {
>> compatible = "amlogic,meson-sm1-pwrc";
>> };
>> --
>> 2.21.0

\
 
 \ /
  Last update: 2019-09-06 10:48    [W:0.035 / U:4.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site