[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v5 3/7] PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability,
but there is no actual support for it.

Trying to access the VPD (for example, as part of lspci -vv or when
reading the vpd sysfs file), results in the following warning print:

pcieport 0001:00:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update

Signed-off-by: Jonathan Chocron <>
Reviewed-by: Gustavo Pimentel <>
drivers/pci/vpd.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
index 4963c2e2bd4c..7915d10f9aa1 100644
--- a/drivers/pci/vpd.c
+++ b/drivers/pci/vpd.c
@@ -571,6 +571,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd);
+ * The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port
+ * device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
+ */
+ PCI_CLASS_BRIDGE_PCI, 8, quirk_blacklist_vpd);

* For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
 \ /
  Last update: 2019-09-05 16:01    [W:0.147 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site