lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] USB: dummy-hcd: fix power budget for SuperSpeed mode
Date
The power budget for SuperSpeed mode should be 900 mA
according to USB specification, so set the power budget
to 900mA for dummy_start_ss which is only used for
SuperSpeed mode.

If the max power consumption of SuperSpeed device is
larger than 500 mA, insufficient available bus power
error happens in usb_choose_configuration function
when the device connects to dummy hcd.

Signed-off-by: Jacky Cao <Jacky.Cao@sony.com>
---
Changes in v3:
- Rename POWER_BUDGET_3_0 to POWER_BUDGET_3
- Update commit message from USB3.0 specification to USB specification

Changes in v2:
- Fix whitespace damage

drivers/usb/gadget/udc/dummy_hcd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 8414fac..3d499d9 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -48,6 +48,7 @@
#define DRIVER_VERSION "02 May 2005"

#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */
+#define POWER_BUDGET_3 900 /* in mA */

static const char driver_name[] = "dummy_hcd";
static const char driver_desc[] = "USB Host+Gadget Emulator";
@@ -2432,7 +2433,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd)
dum_hcd->rh_state = DUMMY_RH_RUNNING;
dum_hcd->stream_en_ep = 0;
INIT_LIST_HEAD(&dum_hcd->urbp_list);
- dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+ dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
#ifdef CONFIG_USB_OTG
--
2.7.4
\
 
 \ /
  Last update: 2019-09-05 06:13    [W:0.069 / U:4.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site