lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] media: dt-bindings: Update bindings for Cadence CSI2RX
Date
This patch adds a DT bindings documentation for
Cadence CSI2RX v1.3 and v2.1 controllers.

Signed-off-by: Jan Kotas <jank@cadence.com>
---
Documentation/devicetree/bindings/media/cdns,csi2rx.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
index 6b02a0657..df828e4e4 100644
--- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
+++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
@@ -5,7 +5,10 @@ The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
lanes in input, and 4 different pixel streams in output.

Required properties:
- - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
+ - compatible: must be set to:
+ * "cdns,csi2rx" or "cdns,csi2rx-1.3" for version 1.3 of the controller,
+ * "cdns,csi2rx-2.1" for v2.1,
+ and an SoC-specific compatible
- reg: base address and size of the memory mapped region
- clocks: phandles to the clocks driving the controller
- clock-names: must contain:
--
2.15.0
\
 
 \ /
  Last update: 2019-09-05 12:57    [W:0.104 / U:9.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site