lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 5/6] arm64: tegra: Add configuration for PCIe C5 sideband signals
Date
Add support to configure PCIe C5's sideband signals PERST# and CLKREQ#
as output and bi-directional signals respectively which unlike other
PCIe controllers sideband signals are not configured by default.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
---
V4:
* None

V3:
* None

V2:
* None

arch/arm64/boot/dts/nvidia/tegra194.dtsi | 38 +++++++++++++++++++++++-
1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index adebbbf36bd0..3c0cf54f0aab 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -3,8 +3,9 @@
#include <dt-bindings/gpio/tegra194-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
-#include <dt-bindings/reset/tegra194-reset.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/power/tegra194-powergate.h>
+#include <dt-bindings/reset/tegra194-reset.h>
#include <dt-bindings/thermal/tegra194-bpmp-thermal.h>

/ {
@@ -130,6 +131,38 @@
};
};

+ pinmux: pinmux@2430000 {
+ compatible = "nvidia,tegra194-pinmux";
+ reg = <0x2430000 0x17000
+ 0xc300000 0x4000>;
+
+ status = "okay";
+
+ pex_rst_c5_out_state: pex_rst_c5_out {
+ pex_rst {
+ nvidia,pins = "pex_l5_rst_n_pgg1";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,lpdr = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+
+ clkreq_c5_bi_dir_state: clkreq_c5_bi_dir {
+ clkreq {
+ nvidia,pins = "pex_l5_clkreq_n_pgg0";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,lpdr = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+ };
+
uarta: serial@3100000 {
compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
reg = <0x03100000 0x40>;
@@ -1365,6 +1398,9 @@
num-viewport = <8>;
linux,pci-domain = <5>;

+ pinctrl-names = "default";
+ pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
+
clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>,
<&bpmp TEGRA194_CLK_PEX1_CORE_5M>;
clock-names = "core", "core_m";
--
2.17.1
\
 
 \ /
  Last update: 2019-09-05 12:49    [W:0.077 / U:1.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site