lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 08/14] drm: rcar-du: Add support for CMM
Hi Laurent,

On Tue, Aug 27, 2019 at 07:34:23PM +0300, Laurent Pinchart wrote:
> Hi Laurent,
>
> On Tue, Aug 27, 2019 at 04:56:19PM +0200, Jacopo Mondi wrote:
> > On Tue, Aug 27, 2019 at 03:24:22AM +0300, Laurent Pinchart wrote:
> > > On Sun, Aug 25, 2019 at 03:51:48PM +0200, Jacopo Mondi wrote:
> > > > Add a driver for the R-Car Display Unit Color Correction Module.
> > > >
> > > > In most of Gen3 SoCs, each DU output channel is provided with a CMM unit
> > > > to perform image enhancement and color correction.
> > > >
> > > > Add support for CMM through a driver that supports configuration of
> > > > the 1-dimensional LUT table. More advanced CMM feature will be
> > > > implemented on top of this basic one.
> > > >
> > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > > ---
> > > > drivers/gpu/drm/rcar-du/Kconfig | 7 +
> > > > drivers/gpu/drm/rcar-du/Makefile | 1 +
> > > > drivers/gpu/drm/rcar-du/rcar_cmm.c | 262 +++++++++++++++++++++++++++++
> > > > drivers/gpu/drm/rcar-du/rcar_cmm.h | 38 +++++
> > > > 4 files changed, 308 insertions(+)
> > > > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c
> > > > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h
> > > >
> > > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
> > > > index 1529849e217e..539d232790d1 100644
> > > > --- a/drivers/gpu/drm/rcar-du/Kconfig
> > > > +++ b/drivers/gpu/drm/rcar-du/Kconfig
> > > > @@ -13,6 +13,13 @@ config DRM_RCAR_DU
> > > > Choose this option if you have an R-Car chipset.
> > > > If M is selected the module will be called rcar-du-drm.
> > > >
> > > > +config DRM_RCAR_CMM
> > > > + bool "R-Car DU Color Management Module (CMM) Support"
> > > > + depends on DRM && OF
> > > > + depends on DRM_RCAR_DU
> > > > + help
> > > > + Enable support for R-Car Color Management Module (CMM).
> > > > +
> > > > config DRM_RCAR_DW_HDMI
> > > > tristate "R-Car DU Gen3 HDMI Encoder Support"
> > > > depends on DRM && OF
> > > > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
> > > > index 6c2ed9c46467..4d1187ccc3e5 100644
> > > > --- a/drivers/gpu/drm/rcar-du/Makefile
> > > > +++ b/drivers/gpu/drm/rcar-du/Makefile
> > > > @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \
> > > > rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o
> > > > rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
> > > >
> > > > +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o
> > > > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o
> > > > obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o
> > > > obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o
> > > > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> > > > new file mode 100644
> > > > index 000000000000..55361f5701e8
> > > > --- /dev/null
> > > > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> > > > @@ -0,0 +1,262 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +/*
> > > > + * rcar_cmm.c -- R-Car Display Unit Color Management Module
> > > > + *
> > > > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > > + */
> > > > +
> > > > +#include <linux/io.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of.h>
> > > > +#include <linux/platform_device.h>
> > > > +#include <linux/pm_runtime.h>
> > > > +
> > > > +#include <drm/drm_color_mgmt.h>
> > > > +
> > > > +#include "rcar_cmm.h"
> > > > +
> > > > +#define CM2_LUT_CTRL 0x0000
> > > > +#define CM2_LUT_CTRL_LUT_EN BIT(0)
> > > > +#define CM2_LUT_TBL_BASE 0x0600
> > > > +#define CM2_LUT_TBL(__i) (CM2_LUT_TBL_BASE + (__i) * 4)
> > > > +
> > > > +struct rcar_cmm {
> > > > + void __iomem *base;
> > > > + bool enabled;
> > > > +
> > > > + /*
> > > > + * @lut: 1D-LUT status
> > > > + * @lut.enabled: 1D-LUT enabled flag
> > > > + * @lut.size: Number of entries in the LUT table
> > >
> > > Please see my review of patch 13/14, I wonder if we could drop this
> > > field.
> > >
> > > > + * @lut.table: Table of 1D-LUT entries scaled to HW support
> > > > + * precision (8-bits per color component)
> > > > + */
> > > > + struct {
> > > > + bool enabled;
> > > > + unsigned int size;
> > > > + u32 table[CMM_GAMMA_LUT_SIZE];
> > > > + } lut;
> > > > +};
> > > > +
> > > > +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg)
> > > > +{
> > > > + return ioread32(rcmm->base + reg);
> > > > +}
> > > > +
> > > > +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data)
> > > > +{
> > > > + iowrite32(data, rcmm->base + reg);
> > > > +}
> > > > +
> > > > +/*
> > > > + * rcar_cmm_lut_extract() - Scale down to hw precision the DRM LUT table
> > >
> > > s/hw/hardware/ (and below too)
> > >
> > > > + * entries and store them.
> > > > + * @rcmm: Pointer to the CMM device
> > > > + * @size: Number of entries in the table
> > > > + * @drm_lut: DRM LUT table
> > > > + */
> > > > +static void rcar_cmm_lut_extract(struct rcar_cmm *rcmm, size_t size,
> > > > + const struct drm_color_lut *drm_lut)
> > > > +{
> > > > + unsigned int i;
> > > > +
> > > > + for (i = 0; i < size; ++i) {
> > > > + const struct drm_color_lut *lut = &drm_lut[i];
> > > > +
> > > > + rcmm->lut.table[i] = drm_color_lut_extract(lut->red, 8) << 16
> > > > + | drm_color_lut_extract(lut->green, 8) << 8
> > > > + | drm_color_lut_extract(lut->blue, 8);
> > > > + }
> > > > +
> > > > + rcmm->lut.size = size;
> > > > +}
> > > > +
> > > > +/*
> > > > + * rcar_cmm_lut_load() - Write to hw the LUT table entries from the local table.
> > > > + *
> > >
> > > No need for a blank line
> > >
> > > > + * @rcmm: Pointer to the CMM device
> > > > + */
> > > > +static void rcar_cmm_lut_load(struct rcar_cmm *rcmm)
> > >
> > > I would name this rcar_cmm_lut_write().
> >
> > I won't, as I would like to convey the LUT tables is loaded from the
> > local cache after it has been scaled down to the hardware supported
> > precision.
>
> "load" hints a read though, and here you write the LUT to the hardware.
> Without reading the comments I would have thought this function would
> read the LUT back from the hardware.
>
> > > > +{
> > > > + unsigned int i;
> > > > +
> > > > + for (i = 0; i < rcmm->lut.size; ++i) {
> > > > + u32 entry = rcmm->lut.table[i];
> > > > +
> > > > + rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry);
> > >
> > > You don't need the local entry variable.
> >
> > True, but the code is nicer to read and the compiler should be smart
> > enough to optimize it away
>
> I'm not sure about nicer to read, I find the opposite personally, but
> it's your code :-)
>
> > > > + }
> > > > +}
> > > > +
> > > > +/**
> > > > + * rcar_cmm_setup() - configure the CMM unit
> > >
> > > s/configure/Configure/ and s/$/./, or the other way around for the other
> > > functions (I don't mine which one, but let's stay consistent).
> >
> > Oh right, sorry for the confusion
>
> It's just my OCD kicking in :-)
>
> > > > + *
> > >
> > > No need for a blank line (same for the functions below).
> > >
> > > > + * @pdev: The platform device associated with the CMM instance
> > > > + * @config: The CRTC-provided configuration.
> > > > + *
> > > > + * Configure the CMM unit with the CRTC-provided configuration.
> > > > + * Currently enabling, disabling and programming of the 1-D LUT unit is
> > > > + * supported.
> > > > + */
> > > > +int rcar_cmm_setup(struct platform_device *pdev,
> > > > + const struct rcar_cmm_config *config)
> > > > +{
> > > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > > > +
> > > > + if (config->lut.size > CMM_GAMMA_LUT_SIZE)
> > > > + return -EINVAL;
> > > > +
> > > > + /*
> > > > + * As rcar_cmm_setup() is called by atomic commit tail helper, it might
> > > > + * be called when the CMM is disabled. As we can't program the hardware
> > > > + * in that case, store the configuration internally and apply it when
> > > > + * the CMM will be enabled by the CRTC through rcar_cmm_enable().
> > > > + */
> > > > + if (!rcmm->enabled) {
> > > > + if (!config->lut.enable)
> > > > + return 0;
> > > > +
> > > > + rcar_cmm_lut_extract(rcmm, config->lut.size, config->lut.table);
> > > > + rcmm->lut.enabled = true;
> > > > +
> > > > + return 0;
> > > > + }
> > > > +
> > > > + /* Stop LUT operations if requested. */
> > > > + if (!config->lut.enable) {
> > > > + if (rcmm->lut.enabled) {
> > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> > > > + rcmm->lut.enabled = false;
> > > > + rcmm->lut.size = 0;
> > > > + }
> > > > +
> > > > + return 0;
> > > > + }
> > > > +
> > > > + /*
> > > > + * Enable LUT and program the new gamma table values.
> > > > + *
> > > > + * FIXME: In order to have stable operations it is required to first
> > > > + * enable the 1D-LUT and then program its table entries. This seems to
> > > > + * contradict what the chip manual reports, and will have to be
> > > > + * reconsidered when implementing support for double buffering.
> > > > + */
> > > > + if (!rcmm->lut.enabled) {
> > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
> > > > + rcmm->lut.enabled = true;
> > > > + }
> > > > +
> > > > + rcar_cmm_lut_extract(rcmm, config->lut.size, config->lut.table);
> > > > + rcar_cmm_lut_load(rcmm);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(rcar_cmm_setup);
> > > > +
> > > > +/**
> > > > + * rcar_cmm_enable() - enable the CMM unit
> > > > + *
> > > > + * @pdev: The platform device associated with the CMM instance
> > > > + *
> > > > + * Enable the CMM unit by enabling the parent clock and enabling the CMM
> > > > + * components, such as 1-D LUT, if requested.
> > > > + */
> > > > +int rcar_cmm_enable(struct platform_device *pdev)
> > > > +{
> > > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > > > + int ret;
> > > > +
> > > > + if (!rcmm)
> > > > + return -EPROBE_DEFER;
> > >
> > > This function is called in rcar_du_crtc_atomic_enable(), so that's not
> > > the right error code. It seems we need another function for the CMM API
> > > to defer probing :-/ I would call it rcar_cmm_init(). This check would
> > > then be removed.
> >
> > I agree about the return code, but not the name, as this function
> > actually enables the CMM.
>
> I meant creating a new rcar_cmm_init() function that would just have the
> !rcmm check.
>
> > PROBE_DEFER does not make any sense here, I
> > wonder where it come from, as the probing of CMM and DU has long
> > happened once we get here (at least, I assume so, if we receive a
> > gamma_table, userspace has already been running, and both DU and CMM
> > should have probed. Otherwise, we can exploit the newly created device
> > link, and make sure DU probes after the CMM).
> >
> > I would just change the return value here, and possibly use the device
> > link to ensure the correct probing sequence.
>
> How does device link help here ?
>

Currently it doesn't, as we are creating a stateless link.

But if we go for a managed device link (which is the default, by the
way, you have to opt-out from it) we can guarantee the CMM has probed
before the DU probes, so that we have a guarantee when we get here
!rcmm cannot happen.

https://www.kernel.org/doc/html/v5.2-rc7/driver-api/device_link.html
"The consumer devices are not probed before the supplier is bound to a driver,
and they’re unbound before the supplier is unbound."

As we create the link, the CMM is the supplier of DU, so we could just
drop the DL_FLAG_STATELESS flag in device_link_add() in 10/14.

Does this match your understanding ?

> > > > +
> > > > + ret = pm_runtime_get_sync(&pdev->dev);
> > > > + if (ret < 0)
> > > > + return ret;
> > > > +
> > > > + /* Apply the LUT table values saved at rcar_cmm_setup() time. */
> > > > + if (rcmm->lut.enabled) {
> > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
> > > > + rcar_cmm_lut_load(rcmm);
> > >
> > > You will not like this, but I just realised that we're now reprogramming
> > > the LUT contents every time the CMM is enabled. Do you think that's
> > > something we should optimise ? And yes, that would require introducing
> >
> > Why so? If we receive an enable after a disable which stops the CMM
> > clock and we have no guarantees the table entries have been kept, or
> > what we receive from userspace has changed or not. Why is this an
> > issue in your opinion?
>
> I thought the hardware preserved the LUT ? Skipping the LUT write is an
> optimisation, so we could do without it in the initial version. I think
> it would become more important with the CLU though, as we'll have more
> data entries there. Maybe we should first check how much time the LUT
> and CLU writes take before deciding to optimise them.
>

Yeah, let's post-pone optimizations...

> > > back an update flag in rcmm->lut :-S Sorry for not realising this when I
> > > proposed dropping it.
> > >
> > > > + }
> > > > +
> > > > + rcmm->enabled = true;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(rcar_cmm_enable);
> > > > +
> > > > +/**
> > > > + * rcar_cmm_disable() - disable the CMM unit
> > > > + *
> > > > + * @pdev: The platform device associated with the CMM instance
> > > > + *
> > > > + * Disable the CMM unit by stopping the parent clock.
> > > > + */
> > > > +void rcar_cmm_disable(struct platform_device *pdev)
> > > > +{
> > > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> > > > +
> > > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> > > > +
> > > > + pm_runtime_put(&pdev->dev);
> > > > +
> > > > + rcmm->lut.enabled = false;
> > > > + rcmm->lut.size = 0;
> > > > +
> > > > + rcmm->enabled = false;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(rcar_cmm_disable);
> > > > +
> > > > +static int rcar_cmm_probe(struct platform_device *pdev)
> > > > +{
> > > > + struct rcar_cmm *rcmm;
> > > > + struct resource *res;
> > > > +
> > > > + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL);
> > > > + if (!rcmm)
> > > > + return -ENOMEM;
> > > > +
> > > > + platform_set_drvdata(pdev, rcmm);
> > > > +
> > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > > + rcmm->base = devm_ioremap_resource(&pdev->dev, res);
> > > > + if (IS_ERR(rcmm->base))
> > > > + return PTR_ERR(rcmm->base);
> > >
> > > You really don't like combining those two calls, do you ? :-)
> >
> > devm_of_iomap() ?
>
> devm_platform_ioremap_resource()
>

Oh stupid, thanks!

Thanks
j

> > > > +
> > > > + pm_runtime_enable(&pdev->dev);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int rcar_cmm_remove(struct platform_device *pdev)
> > > > +{
> > > > + pm_runtime_disable(&pdev->dev);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct of_device_id rcar_cmm_of_table[] = {
> > > > + { .compatible = "renesas,cmm-r8a7795", },
> > > > + { .compatible = "renesas,cmm-r8a7796", },
> > > > + { .compatible = "renesas,cmm-r8a77965", },
> > > > + { .compatible = "renesas,cmm-r8a77990", },
> > > > + { .compatible = "renesas,cmm-r8a77995", },
> > >
> > > As Geert pointed out, I would drop those entries.
> >
> > yes
> >
> > > > + { .compatible = "renesas,rcar-gen3-cmm", },
> > > > + { .compatible = "renesas,rcar-gen2-cmm", },
> > > > + { },
> > > > +};
> > > > +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table);
> > > > +
> > > > +static struct platform_driver rcar_cmm_platform_driver = {
> > > > + .probe = rcar_cmm_probe,
> > > > + .remove = rcar_cmm_remove,
> > > > + .driver = {
> > > > + .name = "rcar-cmm",
> > > > + .of_match_table = rcar_cmm_of_table,
> > > > + },
> > > > +};
> > > > +
> > > > +module_platform_driver(rcar_cmm_platform_driver);
> > > > +
> > > > +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>");
> > > > +MODULE_DESCRIPTION("Renesas R-Car CMM Driver");
> > > > +MODULE_LICENSE("GPL v2");
> > > > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> > > > new file mode 100644
> > > > index 000000000000..b0bb7349ebaa
> > > > --- /dev/null
> > > > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> > > > @@ -0,0 +1,38 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > +/*
> > > > + * rcar_cmm.h -- R-Car Display Unit Color Management Module
> > > > + *
> > > > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > > + */
> > > > +
> > > > +#ifndef __RCAR_CMM_H__
> > > > +#define __RCAR_CMM_H__
> > > > +
> > > > +#define CMM_GAMMA_LUT_SIZE 256
> > > > +
> > > > +struct drm_color_lut;
> > > > +struct platform_device;
> > > > +
> > > > +/**
> > > > + * struct rcar_cmm_config - CMM configuration
> > > > + *
> > > > + * @lut: 1D-LUT configuration
> > > > + * @lut.enable: 1D-LUT enable flag
> > > > + * @lut.table: 1D-LUT table entries
> > > > + * @lut.size: Number of 1D-LUT (max 256)
> > >
> > > s/1D-LUT/1D-LUT entries/
> >
> > ack, I'll change this.
> >
> > > > + */
> > > > +struct rcar_cmm_config {
> > > > + struct {
> > > > + bool enable;
> > > > + struct drm_color_lut *table;
> > > > + unsigned int size;
> > > > + } lut;
> > > > +};
> > > > +
> > > > +int rcar_cmm_enable(struct platform_device *pdev);
> > > > +void rcar_cmm_disable(struct platform_device *pdev);
> > > > +
> > > > +int rcar_cmm_setup(struct platform_device *pdev,
> > > > + const struct rcar_cmm_config *config);
> > > > +
> > > > +#endif /* __RCAR_CMM_H__ */
>
> --
> Regards,
>
> Laurent Pinchart
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-09-05 11:57    [W:0.123 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site