lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 02/11] mmc: dw_mmc: Re-store SDIO IRQs mask at system resume
On Thu, 5 Sep 2019 at 02:14, Matthias Kaehlcke <mka@chromium.org> wrote:
>
> On Tue, Sep 03, 2019 at 04:21:58PM +0200, Ulf Hansson wrote:
> > In cases when SDIO IRQs have been enabled, runtime suspend is prevented by
> > the driver. However, this still means dw_mci_runtime_suspend|resume() gets
> > called during system suspend/resume, via pm_runtime_force_suspend|resume().
> > This means during system suspend/resume, the register context of the dw_mmc
> > device most likely loses its register context, even in cases when SDIO IRQs
> > have been enabled.
> >
> > To re-enable the SDIO IRQs during system resume, the dw_mmc driver
> > currently relies on the mmc core to re-enable the SDIO IRQs when it resumes
> > the SDIO card, but this isn't the recommended solution. Instead, it's
> > better to deal with this locally in the dw_mmc driver, so let's do that.
> >
> > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > ---
> > drivers/mmc/host/dw_mmc.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> > index eea52e2c5a0c..f114710e82b4 100644
> > --- a/drivers/mmc/host/dw_mmc.c
> > +++ b/drivers/mmc/host/dw_mmc.c
> > @@ -3460,6 +3460,10 @@ int dw_mci_runtime_resume(struct device *dev)
> > /* Force setup bus to guarantee available clock output */
> > dw_mci_setup_bus(host->slot, true);
> >
> > + /* Re-enable SDIO interrupts. */
> > + if (sdio_irq_enabled(host->slot->mmc))
> > + __dw_mci_enable_sdio_irq(host->slot, 1);
> > +
> > /* Now that slots are all setup, we can enable card detect */
> > dw_mci_enable_cd(host);
>
> Looks reasonable to me, besides the bikeshedding over
> 'sdio_irq_enabled' (in "mmc: core: Add helper function to indicate
> if SDIO IRQs is enabled").
>
> One thing I wonder is why this change is only needed for dw_mmc and
> mtk-sd, but not for others like sunxi_mmc. Any insights for a SDIO
> newb?

mtk-sd and dw_mmc is using MMC_CAP2_SDIO_IRQ_NOTHREAD and
sdio_signal_irq(). This is also the case for sdhci, but sdhci is
already internally dealing restoring SDIO IRQs during system resume.

The other host drivers haven't yet converted to
MMC_CAP2_SDIO_IRQ_NOTHREAD. I have a series for that, not yet
completed and thus not ready to be posted. Once that happens, all host
drivers needs to care about re-enabling SDIO IRQs durings system
resume as well.

For those host that currently doesn't use MMC_CAP2_SDIO_IRQ_NOTHREAD,
the core wakes up the sdio_irq_thread from mmc_sdio_resume(), which
later will calls the ->enable_sdio_irq().

Perhaps I should add some information about this in the changelog, let
me think about it for the next version.

Kind regards
Uffe

\
 
 \ /
  Last update: 2019-09-05 09:31    [W:0.071 / U:4.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site