lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 4/4] arm64: dts: add support for A1 based Amlogic AD401
Hi Jianxin,

(it's great to see that you and your team are upstreaming this early)

On Thu, Sep 5, 2019 at 9:08 AM Jianxin Pan <jianxin.pan@amlogic.com> wrote:
[...]
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x8000000>;
> + /*linux,usable-memory = <0x0 0x0 0x0 0x8000000>;*/
why do we need that comment here (I don't understand it - why doesn't
the "reg" property cover this)?

> + };
> +};
> +
> +&uart_AO_B {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> new file mode 100644
> index 00000000..4d476ac
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> @@ -0,0 +1,122 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "amlogic,a1";
> +
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <0x2>;
> + #size-cells = <0x0>;
only now I notice that all our other .dtsi also use hex values
(instead of decimal as just a few lines above) here
do you know if there is a particular reason for this?

[...]
> + uart_AO_B: serial@fe002000 {
> + compatible = "amlogic,meson-gx-uart",
> + "amlogic,meson-ao-uart";
> + reg = <0x0 0xfe002000 0x0 0x18>;
the indentation of the "reg" property is off here

also I'm a bit surprised to see no busses (like aobus, cbus, periphs, ...) here
aren't there any busses defined in the A1 SoC implementation or are
were you planning to add them later?


Martin

\
 
 \ /
  Last update: 2019-09-05 22:16    [W:0.074 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site