lkml.org 
[lkml]   [2019]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] s390: vfio-ap: remove unnecessary calls to disable queue interrupts
From
Date
Halil,

can you also send this patch as a separate mail. This also requires a much better
patch description about the why and it certainly should also have an agreement from
Anthony.

On 30.08.19 18:02, Halil Pasic wrote:
> From: Halil Pasic <pasic@linux.ibm.com>
> Date: Fri, 30 Aug 2019 17:39:47 +0200
> Subject: [PATCH 2/2] s390: vfio-ap: don't wait after AQIC interpretation
>
> Waiting for the asynchronous part of AQIC to complete as a part
> AQIC implementation is unnecessary and silly.
>
> Let's get rid of vfio_ap_wait_for_irqclear().
>
> Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
> ---
> drivers/s390/crypto/vfio_ap_ops.c | 50 ++-------------------------------------
> 1 file changed, 2 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
> index dd07ebf..8d098f0 100644
> --- a/drivers/s390/crypto/vfio_ap_ops.c
> +++ b/drivers/s390/crypto/vfio_ap_ops.c
> @@ -68,47 +68,6 @@ static struct vfio_ap_queue *vfio_ap_get_queue(
> }
>
> /**
> - * vfio_ap_wait_for_irqclear
> - * @apqn: The AP Queue number
> - *
> - * Checks the IRQ bit for the status of this APQN using ap_tapq.
> - * Returns if the ap_tapq function succeeded and the bit is clear.
> - * Returns if ap_tapq function failed with invalid, deconfigured or
> - * checkstopped AP.
> - * Otherwise retries up to 5 times after waiting 20ms.
> - *
> - */
> -static void vfio_ap_wait_for_irqclear(int apqn)
> -{
> - struct ap_queue_status status;
> - int retry = 5;
> -
> - do {
> - status = ap_tapq(apqn, NULL);
> - switch (status.response_code) {
> - case AP_RESPONSE_NORMAL:
> - case AP_RESPONSE_RESET_IN_PROGRESS:
> - if (!status.irq_enabled)
> - return;
> - /* Fall through */
> - case AP_RESPONSE_BUSY:
> - msleep(20);
> - break;
> - case AP_RESPONSE_Q_NOT_AVAIL:
> - case AP_RESPONSE_DECONFIGURED:
> - case AP_RESPONSE_CHECKSTOPPED:
> - default:
> - WARN_ONCE(1, "%s: tapq rc %02x: %04x\n", __func__,
> - status.response_code, apqn);
> - return;
> - }
> - } while (--retry);
> -
> - WARN_ONCE(1, "%s: tapq rc %02x: %04x could not clear IR bit\n",
> - __func__, status.response_code, apqn);
> -}
> -
> -/**
> * vfio_ap_free_aqic_resources
> * @q: The vfio_ap_queue
> *
> @@ -133,14 +92,10 @@ static void vfio_ap_free_aqic_resources(struct vfio_ap_queue *q)
> * @q: The vfio_ap_queue
> *
> * Uses ap_aqic to disable the interruption and in case of success, reset
> - * in progress or IRQ disable command already proceeded: calls
> - * vfio_ap_wait_for_irqclear() to check for the IRQ bit to be clear
> - * and calls vfio_ap_free_aqic_resources() to free the resources associated
> + * in progress or IRQ disable command already proceeded :calls
> + * vfio_ap_free_aqic_resources() to free the resources associated
> * with the AP interrupt handling.
> *
> - * In the case the AP is busy, or a reset is in progress,
> - * retries after 20ms, up to 5 times.
> - *
> * Returns if ap_aqic function failed with invalid, deconfigured or
> * checkstopped AP.
> */
> @@ -155,7 +110,6 @@ struct ap_queue_status vfio_ap_irq_disable(struct vfio_ap_queue *q)
> switch (status.response_code) {
> case AP_RESPONSE_OTHERWISE_CHANGED:
> case AP_RESPONSE_NORMAL:
> - vfio_ap_wait_for_irqclear(q->apqn);
> goto end_free;
> case AP_RESPONSE_RESET_IN_PROGRESS:
> case AP_RESPONSE_BUSY:
> -- 2.5.5

\
 
 \ /
  Last update: 2019-09-04 09:36    [W:0.164 / U:3.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site