lkml.org 
[lkml]   [2019]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.2 081/143] usb: hcd: use managed device resources
Date
From: Schmid, Carsten <Carsten_Schmid@mentor.com>

commit 76da906ad727048a74bb8067031ee99fc070c7da upstream.

Using managed device resources in usb_hcd_pci_probe() allows devm usage for
resource subranges, such as the mmio resource for the platform device
created to control host/device mode mux, which is a xhci extended
capability, and sits inside the xhci mmio region.

If managed device resources are not used then "parent" resource
is released before subrange at driver removal as .remove callback is
called before the devres list of resources for this device is walked
and released.

This has been observed with the xhci extended capability driver causing a
use-after-free which is now fixed.

An additional nice benefit is that error handling on driver initialisation
is simplified much.

Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com>
Tested-by: Carsten Schmid <carsten_schmid@mentor.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: fa31b3cb2ae1 ("xhci: Add Intel extended cap / otg phy mux handling")
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://lore.kernel.org/r/1566569488679.31808@mentor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/core/hcd-pci.c | 30 ++++++++----------------------
1 file changed, 8 insertions(+), 22 deletions(-)

--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -216,17 +216,18 @@ int usb_hcd_pci_probe(struct pci_dev *de
/* EHCI, OHCI */
hcd->rsrc_start = pci_resource_start(dev, 0);
hcd->rsrc_len = pci_resource_len(dev, 0);
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
- driver->description)) {
+ if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start,
+ hcd->rsrc_len, driver->description)) {
dev_dbg(&dev->dev, "controller already in use\n");
retval = -EBUSY;
goto put_hcd;
}
- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ hcd->regs = devm_ioremap_nocache(&dev->dev, hcd->rsrc_start,
+ hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(&dev->dev, "error mapping memory\n");
retval = -EFAULT;
- goto release_mem_region;
+ goto put_hcd;
}

} else {
@@ -240,8 +241,8 @@ int usb_hcd_pci_probe(struct pci_dev *de

hcd->rsrc_start = pci_resource_start(dev, region);
hcd->rsrc_len = pci_resource_len(dev, region);
- if (request_region(hcd->rsrc_start, hcd->rsrc_len,
- driver->description))
+ if (devm_request_region(&dev->dev, hcd->rsrc_start,
+ hcd->rsrc_len, driver->description))
break;
}
if (region == PCI_ROM_RESOURCE) {
@@ -275,20 +276,13 @@ int usb_hcd_pci_probe(struct pci_dev *de
}

if (retval != 0)
- goto unmap_registers;
+ goto put_hcd;
device_wakeup_enable(hcd->self.controller);

if (pci_dev_run_wake(dev))
pm_runtime_put_noidle(&dev->dev);
return retval;

-unmap_registers:
- if (driver->flags & HCD_MEMORY) {
- iounmap(hcd->regs);
-release_mem_region:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- } else
- release_region(hcd->rsrc_start, hcd->rsrc_len);
put_hcd:
usb_put_hcd(hcd);
disable_pci:
@@ -347,14 +341,6 @@ void usb_hcd_pci_remove(struct pci_dev *
dev_set_drvdata(&dev->dev, NULL);
up_read(&companions_rwsem);
}
-
- if (hcd->driver->flags & HCD_MEMORY) {
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- } else {
- release_region(hcd->rsrc_start, hcd->rsrc_len);
- }
-
usb_put_hcd(hcd);
pci_disable_device(dev);
}

\
 
 \ /
  Last update: 2019-09-04 20:14    [W:0.367 / U:3.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site