lkml.org 
[lkml]   [2019]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] mtd: rawnand: use bounce buffer when vmalloced data buf detected
On Mon, 30 Sep 2019 12:01:28 -0400
Kamal Dasu <kdasu.kdev@gmail.com> wrote:

> Does anyone have any comments on this patch ?.
>
> Kamal
>
> On Fri, Sep 6, 2019 at 3:49 PM Kamal Dasu <kdasu.kdev@gmail.com> wrote:
> >
> > For controller drivers that use DMA and set NAND_USE_BOUNCE_BUFFER
> > option use data buffers that are not vmalloced, aligned and have
> > valid virtual address to be able to do DMA transfers. This change
> > adds additional check and makes use of data buffer allocated
> > in nand_base driver when it is passed a vmalloced data buffer for
> > DMA transfers.
> >
> > Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
> > ---
> > drivers/mtd/nand/raw/nand_base.c | 14 ++++++++------
> > 1 file changed, 8 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> > index 91f046d4d452..46f6965a896a 100644
> > --- a/drivers/mtd/nand/raw/nand_base.c
> > +++ b/drivers/mtd/nand/raw/nand_base.c
> > @@ -45,6 +45,12 @@
> >
> > #include "internals.h"
> >
> > +static int nand_need_bounce_buf(const void *buf, struct nand_chip *chip)
> > +{
> > + return !virt_addr_valid(buf) || is_vmalloc_addr(buf) ||

I thought virt_addr_valid() was implying !is_vmalloc_addr(), are you
sure you need that test, and can you tell me on which arch(es) this is
needed.

> > + !IS_ALIGNED((unsigned long)buf, chip->buf_align);
> > +}
> > +
> > /* Define default oob placement schemes for large and small page devices */
> > static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
> > struct mtd_oob_region *oobregion)
> > @@ -3183,9 +3189,7 @@ static int nand_do_read_ops(struct nand_chip *chip, loff_t from,
> > if (!aligned)
> > use_bufpoi = 1;
> > else if (chip->options & NAND_USE_BOUNCE_BUFFER)
> > - use_bufpoi = !virt_addr_valid(buf) ||
> > - !IS_ALIGNED((unsigned long)buf,
> > - chip->buf_align);
> > + use_bufpoi = nand_need_bounce_buf(buf, chip);
> > else
> > use_bufpoi = 0;
> >
> > @@ -4009,9 +4013,7 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
> > if (part_pagewr)
> > use_bufpoi = 1;
> > else if (chip->options & NAND_USE_BOUNCE_BUFFER)
> > - use_bufpoi = !virt_addr_valid(buf) ||
> > - !IS_ALIGNED((unsigned long)buf,
> > - chip->buf_align);
> > + use_bufpoi = nand_need_bounce_buf(buf, chip);
> > else
> > use_bufpoi = 0;
> >
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2019-09-30 18:25    [W:0.051 / U:14.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site