lkml.org 
[lkml]   [2019]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] mtd: rawnand: use bounce buffer when vmalloced data buf detected
Does anyone have any comments on this patch ?.

Kamal

On Fri, Sep 6, 2019 at 3:49 PM Kamal Dasu <kdasu.kdev@gmail.com> wrote:
>
> For controller drivers that use DMA and set NAND_USE_BOUNCE_BUFFER
> option use data buffers that are not vmalloced, aligned and have
> valid virtual address to be able to do DMA transfers. This change
> adds additional check and makes use of data buffer allocated
> in nand_base driver when it is passed a vmalloced data buffer for
> DMA transfers.
>
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
> ---
> drivers/mtd/nand/raw/nand_base.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index 91f046d4d452..46f6965a896a 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -45,6 +45,12 @@
>
> #include "internals.h"
>
> +static int nand_need_bounce_buf(const void *buf, struct nand_chip *chip)
> +{
> + return !virt_addr_valid(buf) || is_vmalloc_addr(buf) ||
> + !IS_ALIGNED((unsigned long)buf, chip->buf_align);
> +}
> +
> /* Define default oob placement schemes for large and small page devices */
> static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
> struct mtd_oob_region *oobregion)
> @@ -3183,9 +3189,7 @@ static int nand_do_read_ops(struct nand_chip *chip, loff_t from,
> if (!aligned)
> use_bufpoi = 1;
> else if (chip->options & NAND_USE_BOUNCE_BUFFER)
> - use_bufpoi = !virt_addr_valid(buf) ||
> - !IS_ALIGNED((unsigned long)buf,
> - chip->buf_align);
> + use_bufpoi = nand_need_bounce_buf(buf, chip);
> else
> use_bufpoi = 0;
>
> @@ -4009,9 +4013,7 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
> if (part_pagewr)
> use_bufpoi = 1;
> else if (chip->options & NAND_USE_BOUNCE_BUFFER)
> - use_bufpoi = !virt_addr_valid(buf) ||
> - !IS_ALIGNED((unsigned long)buf,
> - chip->buf_align);
> + use_bufpoi = nand_need_bounce_buf(buf, chip);
> else
> use_bufpoi = 0;
>
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-09-30 18:01    [W:0.055 / U:5.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site