lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 1/5] dt-bindings: fsl: scu: add scu power key binding
From
Date


On 03.09.19 16:03, Anson Huang wrote:
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> system controller, the system controller is in charge of system
> power, clock and power key event etc. management, Linux kernel
> has to communicate with system controller via MU (message unit)
> IPC to get power key event, add binding doc for i.MX system
> controller power key driver.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V1:
> - remove "wakeup-source" property, as it is NOT needed for SCU interrupt;
> - remove "status" in example.
> ---
> .../devicetree/bindings/arm/freescale/fsl,scu.txt | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index c149fad..f93e2e4 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -157,6 +157,15 @@ Required properties:
> Optional properties:
> - timeout-sec: contains the watchdog timeout in seconds.
>
> +Power key bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible: should be:
> + "fsl,imx8qxp-sc-pwrkey"
> + followed by "fsl,imx-sc-pwrkey";
> +- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt

linux,keycodes is required parameter. So, this kay cab be anything. Why the compatible is
called pwrkey? Probably it is better to call it "*-sc-key"

> +
> Example (imx8qxp):
> -------------
> aliases {
> @@ -220,6 +229,11 @@ firmware {
> compatible = "fsl,imx8qxp-sc-rtc";
> };
>
> + scu_pwrkey: scu-pwrkey {
> + compatible = "fsl,imx8qxp-sc-pwrkey", "fsl,imx-sc-pwrkey";
> + linux,keycode = <KEY_POWER>;
> + };
> +
> watchdog {
> compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> timeout-sec = <60>;
>

Kind regards,
Oleksij Rempel

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2019-09-03 08:33    [W:0.118 / U:1.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site