lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 0/4] Reset xHCI port PHY on disconnect
Hi Mathias,

Could you please help to review this patch series?

Regards,
Srinath.

On Wed, Jul 31, 2019 at 3:50 PM Srinath Mannam
<srinath.mannam@broadcom.com> wrote:
>
> This patch set adds a quirk in xHCI driver to reset PHY of xHCI port on
> its disconnect event.
>
> This patch set is based on Linux-5.2-rc4.
>
> Changes from v1:
> - Addressed Mathias's comments
> - Modified mapping of HC ports and their corresponding PHYs
> - Addressed Rob's comments
> - Removed usb-phy-port-reset DT property.
> - Added quirk in platform data using HCI compatible string.
> - Add phy ports in phy attr structure to have enabled ports bitmask.
> - Modified #phy-cells of sr-phy to pass phy ports bitmask.
>
> Srinath Mannam (4):
> phy: Add phy ports in attrs
> dt-bindings: phy: Modify Stingray USB PHY #phy-cells
> phy: sr-usb: Set phy ports
> dt-bindings: usb-xhci: Add platform specific compatible for Stingray
> xHCI
> drivers: xhci: Add quirk to reset xHCI port PHY
>
> .../devicetree/bindings/phy/brcm,stingray-usb-phy.txt | 14 ++++++++------
> Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 +
> drivers/phy/broadcom/phy-bcm-sr-usb.c | 9 ++++++++-
> drivers/usb/core/hcd.c | 6 ++++++
> drivers/usb/core/phy.c | 19 +++++++++++++++++++
> drivers/usb/core/phy.h | 1 +
> drivers/usb/host/xhci-plat.c | 10 ++++++++++
> drivers/usb/host/xhci-plat.h | 1 +
> drivers/usb/host/xhci-ring.c | 9 ++++++---
> drivers/usb/host/xhci.h | 1 +
> include/linux/phy/phy.h | 10 ++++++++++
> include/linux/usb/hcd.h | 1 +
> 12 files changed, 72 insertions(+), 10 deletions(-)
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-09-03 17:00    [W:0.068 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site