[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] Add new binding regulator-fixed-clock to regulator-fixed

Our hardware has a FET that is switching power rail of the ethernet PHY
on and off. This switching enable signal is a clock from the SoC.

There is no possibility in regulator subsystem to have this hardware
reflected in software.

I already discussed with Mark Brown about possible solutions and he
suggested to create at least a new compatible. [1]
This discussion includes also a better explanation of our circuit as
well as schematics. So please refer to that link if you have questions
about that.

In this first attempt I created a new binding "regulator-fixed-clock"
that can take a clock from devicetree. This is a simple addition to
regulator-fixed. If the binding regulator-fixed-clock is given, the
clock is simply enabled on regulator enable and disabled on regulator
To be able to have multiple consumers a counter variable is also given
that tells how many consumers need power from this regulator.

Best regards,


Philippe Schenker (3):
regulator: fixed: add possibility to enable by clock
ARM: dts: imx6ull-colibri: add phy-supply and respective regulator
dt-bindings: regulator: add regulator-fixed-clock binding

.../bindings/regulator/fixed-regulator.yaml | 18 +++-
arch/arm/boot/dts/imx6ull-colibri.dtsi | 12 +++
drivers/regulator/fixed.c | 86 ++++++++++++++++++-
3 files changed, 112 insertions(+), 4 deletions(-)


 \ /
  Last update: 2019-09-03 10:04    [W:0.104 / U:2.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site