lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] mtd: spi-nor: intel-spi: support chips without software sequencer
Date
Some flash controllers don't have a software sequencer. Avoid
configuring the register addresses for it, and double check
everywhere that its not accidentally trying to be used.

Every use of `sregs` is now guarded by a check of `sregs` or
`swseq_reg`. The check might be done in the calling function.

Signed-off-by: Jethro Beekman <jethro@fortanix.com>
---
drivers/mtd/spi-nor/intel-spi.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index 1ccf23f..195cdca 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -187,12 +187,16 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
readl(ispi->pregs + PR(i)));

- value = readl(ispi->sregs + SSFSTS_CTL);
- dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value);
- dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n",
- readl(ispi->sregs + PREOP_OPTYPE));
- dev_dbg(ispi->dev, "OPMENU0=0x%08x\n", readl(ispi->sregs + OPMENU0));
- dev_dbg(ispi->dev, "OPMENU1=0x%08x\n", readl(ispi->sregs + OPMENU1));
+ if (ispi->sregs) {
+ value = readl(ispi->sregs + SSFSTS_CTL);
+ dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value);
+ dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n",
+ readl(ispi->sregs + PREOP_OPTYPE));
+ dev_dbg(ispi->dev, "OPMENU0=0x%08x\n",
+ readl(ispi->sregs + OPMENU0));
+ dev_dbg(ispi->dev, "OPMENU1=0x%08x\n",
+ readl(ispi->sregs + OPMENU1));
+ }

if (ispi->info->type == INTEL_SPI_BYT)
dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR));
@@ -367,6 +371,11 @@ static int intel_spi_init(struct intel_spi *ispi)
!(uvscc & ERASE_64K_OPCODE_MASK))
ispi->erase_64k = false;

+ if (ispi->sregs == NULL && (ispi->swseq_reg || ispi->swseq_erase)) {
+ dev_err(ispi->dev, "software sequencer not supported, but required\n");
+ return -EINVAL;
+ }
+
/*
* Some controllers can only do basic operations using hardware
* sequencer. All other operations are supposed to be carried out
@@ -383,7 +392,7 @@ static int intel_spi_init(struct intel_spi *ispi)
val = readl(ispi->base + HSFSTS_CTL);
ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN);

- if (ispi->locked) {
+ if (ispi->locked && ispi->sregs) {
/*
* BIOS programs allowed opcodes and then locks down the
* register. So read back what opcodes it decided to support.
--
2.7.4
\
 
 \ /
  Last update: 2019-09-04 03:16    [W:0.064 / U:2.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site