lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v2] riscv: add support for SECCOMP and SECCOMP_FILTER
From
On Wed, 28 Aug 2019 10:52:05 PDT (-0700), luto@amacapital.net wrote:
>
>
>> On Aug 25, 2019, at 2:59 PM, Kees Cook <keescook@chromium.org> wrote:
>>
>>> On Thu, Aug 22, 2019 at 01:55:22PM -0700, David Abdurachmanov wrote:
>>> This patch was extensively tested on Fedora/RISCV (applied by default on
>>> top of 5.2-rc7 kernel for <2 months). The patch was also tested with 5.3-rc
>>> on QEMU and SiFive Unleashed board.
>>
>> Oops, I see the mention of QEMU here. Where's the best place to find
>> instructions on creating a qemu riscv image/environment?
>
> I don’t suppose one of you riscv folks would like to contribute riscv support to virtme? virtme-run —arch=riscv would be quite nice, and the total patch should be just a couple lines. Unfortunately, it helps a lot to understand the subtleties of booting the architecture to write those couple lines :)

What mailing list should I sent this to? You need to use the "virtme" branch
of kernel.org/palmer/linux.git until I send the defconfig patches.

commit a8bd7b318691891991caea298f9a5ed0f815c322
gpg: Signature made Tue 03 Sep 2019 03:22:45 PM PDT
gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
gpg: issuer "palmer@dabbelt.com"
gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [ultimate]
gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [ultimate]
Author: Palmer Dabbelt <palmer@sifive.com>
Date: Tue Sep 3 14:39:39 2019 -0700

Add RISC-V support

This expects a kernel with the plan 9 stuff supported (not yet in
defconfig) and a new QEMU (as described in the README). I'm also not
100% sure it's working, as I'm getting

/bin/sh: exec: line 1: /run/virtme/guesttools/virtme-init: not found

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

diff --git a/README.md b/README.md
index 51b6583..d53a456 100644
--- a/README.md
+++ b/README.md
@@ -112,6 +112,14 @@ PPC64

PPC64 appears to be reasonably functional.

+RISC-V
+------
+
+riscv64 works out of the box, but you'll neet at least QEMU-4.1.0 to be
+able to run `vmlinux`-style kernels. riscv32 is not supported because
+there are no existing userspace images for it. Support is provided via
+QEMU's `virt` machine with OpenSBI for firmware.
+
Others
------

diff --git a/virtme/architectures.py b/virtme/architectures.py
index 9871ea4..ee84494 100644
--- a/virtme/architectures.py
+++ b/virtme/architectures.py
@@ -207,6 +207,30 @@ class Arch_ppc64(Arch):
# Apparently SLOF (QEMU's bundled firmware?) can't boot a zImage.
return 'vmlinux'

+class Arch_riscv64(Arch):
+ def __init__(self, name):
+ Arch.__init__(self, name)
+
+ self.defconfig_target = 'riscv64_defconfig'
+ self.qemuname = 'riscv64'
+ self.linuxname = 'riscv'
+ self.gccname = 'riscv64'
+
+ def qemuargs(self, is_native):
+ ret = Arch.qemuargs(is_native)
+
+ ret.extend(['-machine', 'virt'])
+ ret.extend(['-bios', 'default'])
+
+ return ret
+
+ @staticmethod
+ def serial_console_args():
+ return ['console=ttyS0']
+
+ def kimg_path(self):
+ return 'arch/riscv/boot/Image'
+
class Arch_sparc64(Arch):
def __init__(self, name):
Arch.__init__(self, name)
@@ -264,6 +288,7 @@ ARCHES = {
'arm': Arch_arm,
'aarch64': Arch_aarch64,
'ppc64': Arch_ppc64,
+ 'riscv64': Arch_riscv64,
'sparc64': Arch_sparc64,
's390x': Arch_s390x,
}
\
 
 \ /
  Last update: 2019-09-04 00:27    [W:0.081 / U:1.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site