[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
SubjectApplied "ASoC: es8316: add DT-bindings" to the asoc tree
The patch

ASoC: es8316: add DT-bindings

has been applied to the asoc tree at for-5.4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.


From 3a3edd6ffe671115c4b3d715f08ed0cf4e927ce1 Mon Sep 17 00:00:00 2001
From: Katsuhiro Suzuki <>
Date: Wed, 4 Sep 2019 01:53:22 +0900
Subject: [PATCH] ASoC: es8316: add DT-bindings

This patch adds missing DT-bindings document for Everest ES8316.

Signed-off-by: Katsuhiro Suzuki <>
Signed-off-by: Mark Brown <>
.../bindings/sound/everest,es8316.txt | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/everest,es8316.txt

diff --git a/Documentation/devicetree/bindings/sound/everest,es8316.txt b/Documentation/devicetree/bindings/sound/everest,es8316.txt
new file mode 100644
index 000000000000..aefcff9c48a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es8316.txt
@@ -0,0 +1,20 @@
+Everest ES8316 audio CODEC
+This device supports both I2C and SPI.
+Required properties:
+ - compatible : should be "everest,es8316"
+ - reg : the I2C address of the device for I2C
+ - clocks : a list of phandle, should contain entries for clock-names
+ - clock-names : should include as follows:
+ "mclk" : master clock (MCLK) of the device
+es8316: codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&clks 10>;
+ clock-names = "mclk";
 \ /
  Last update: 2019-09-03 20:01    [W:0.072 / U:2.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site