Messages in this thread |  | | Date | Tue, 3 Sep 2019 18:48:44 +0100 | From | Rob Herring <> | Subject | Re: [PATCH v2 1/2] dt-bindings: Add binding for IT6505. |
| |
On Tue, Sep 03, 2019 at 06:51:53PM +0800, allen wrote: > From: Allen Chen <allen.chen@ite.com.tw> > > Add a DT binding documentation for IT6505. > > Signed-off-by: Allen Chen <allen.chen@ite.com.tw> > > --- > Comments in v1 would be addressed later in v3. > --- > .../bindings/display/bridge/ite,it6505.txt | 30 ++++++++++++++++++++++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > 2 files changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
This won't apply. Base your patches on current (latest -rc) kernels.
We've moved to a DT schema format. Minimally vendor-prefixes.txt will have to change. It's also preferred for display bridges.
> > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt > new file mode 100644 > index 0000000..c3506ac > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt > @@ -0,0 +1,30 @@ > +iTE it6505 DP bridge bindings > + > +Required properties: > + - compatible: "ite,it6505" > + - reg: i2c address of the bridge > + - ovdd-supply: I/O voltage > + - pwr18-supply: Core voltage > + - interrupts: interrupt specifier of INT pin > + - reset-gpios: gpio specifier of RESET pin > + > +Example: > + it6505dptx: it6505dptx@5c {
dp-bridge@5c
> + compatible = "ite,it6505"; > + status = "okay";
Don't show status in examples.
> + interrupt-parent = <&pio>;
And interrupt-parent.
> + interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>; > + reg = <0x5c>; > + pinctrl-names = "default"; > + pinctrl-0 = <&it6505_pins>; > + ovdd-supply = <&mt6358_vsim1_reg>; > + pwr18-supply = <&it6505_pp18_reg>; > + reset-gpios = <&pio 179 1>; > + hpd-gpios = <&pio 9 0>;
This goes in a connector node.
> + extcon = <&usbc_extcon>;
extcon is deprecated. Drop or use the usb-connector binding.
Plus this is not documented above.
> + port {
Need to list what each port is. You're going to need an output port too for a dp-connector or usb-c connector.
> + it6505_in: endpoint { > + remote-endpoint = <&dpi_out>; > + }; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 2c3fc51..c088646 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -184,6 +184,7 @@ iom Iomega Corporation > isee ISEE 2007 S.L. > isil Intersil > issi Integrated Silicon Solutions Inc. > +ite iTE Tech. Inc. > itead ITEAD Intelligent Systems Co.Ltd > iwave iWave Systems Technologies Pvt. Ltd. > jdi Japan Display Inc. > -- > 1.9.1 >
|  |