[lkml]   [2019]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
On 27/09/2019 15:33, Adam Ford wrote:

>> It looks like a bug in omap clock handling.
>> DSS uses dss1_alwon_fck_3430es2 as fclk. dss1_alwon_fck_3430es2 comes
>> from dpll4_ck, and there's a divider after the PLL, dpll4_m4_ck.
>> When the DSS driver sets dss1_alwon_fck_3430es2 rate to 27000000 or
>> 27870967, which can be created with m4 dividers 32 and 31, it looks like
>> the divider goes to bypass, or to a very small value. DSS gets a very
>> high clock rate and breaks down.
> Is there anything I can do to help troubleshoot this? I could insert
> a hack that checks if we're omap3 and if so make the divider equal to
> 4, but that seems like just a hack.
> I can run more tests or insert code somewhere if you want.

I think it's up to someone who's knowledgeable in omap clock framework.
I'm kind of hoping that Tero or Tony would be willing to debug =). I can
try to find time to debug the omap clk framework, but I'll be going on
blindly there.


Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

 \ /
  Last update: 2019-09-27 15:48    [W:0.053 / U:5.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site