lkml.org 
[lkml]   [2019]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/4] PCI: hv: Add the support of hibernation
On Wed, Sep 11, 2019 at 11:38:20PM +0000, Dexuan Cui wrote:
> Implement the suspend/resume callbacks for hibernation.
>
> hv_pci_suspend() needs to prevent any new work from being queued: a later
> patch will address this issue.

I don't see why you have two separate patches, the second one fixing the
previous (this one). Squash them together and merge them as such, or
there is something I am missing here.

Lorenzo

> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> ---
> drivers/pci/controller/pci-hyperv.c | 76 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 76 insertions(+)
>
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index 03fa039..3b77a3a 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -1398,6 +1398,23 @@ static void prepopulate_bars(struct hv_pcibus_device *hbus)
>
> spin_lock_irqsave(&hbus->device_list_lock, flags);
>
> + /*
> + * Clear the memory enable bit, in case it's already set. This occurs
> + * in the suspend path of hibernation, where the device is suspended,
> + * resumed and suspended again: see hibernation_snapshot() and
> + * hibernation_platform_enter().
> + *
> + * If the memory enable bit is already set, Hyper-V sliently ignores
> + * the below BAR updates, and the related PCI device driver can not
> + * work, because reading from the device register(s) always returns
> + * 0xFFFFFFFF.
> + */
> + list_for_each_entry(hpdev, &hbus->children, list_entry) {
> + _hv_pcifront_read_config(hpdev, PCI_COMMAND, 2, &command);
> + command &= ~PCI_COMMAND_MEMORY;
> + _hv_pcifront_write_config(hpdev, PCI_COMMAND, 2, command);
> + }
> +
> /* Pick addresses for the BARs. */
> do {
> list_for_each_entry(hpdev, &hbus->children, list_entry) {
> @@ -2737,6 +2754,63 @@ static int hv_pci_remove(struct hv_device *hdev)
> return ret;
> }
>
> +static int hv_pci_suspend(struct hv_device *hdev)
> +{
> + struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
> + int ret;
> +
> + /* XXX: Need to prevent any new work from being queued. */
> + flush_workqueue(hbus->wq);
> +
> + ret = hv_pci_bus_exit(hdev, true);
> + if (ret)
> + return ret;
> +
> + vmbus_close(hdev->channel);
> +
> + return 0;
> +}
> +
> +static int hv_pci_resume(struct hv_device *hdev)
> +{
> + struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
> + enum pci_protocol_version_t version[1];
> + int ret;
> +
> + hbus->state = hv_pcibus_init;
> +
> + ret = vmbus_open(hdev->channel, pci_ring_size, pci_ring_size, NULL, 0,
> + hv_pci_onchannelcallback, hbus);
> + if (ret)
> + return ret;
> +
> + /* Only use the version that was in use before hibernation. */
> + version[0] = pci_protocol_version;
> + ret = hv_pci_protocol_negotiation(hdev, version, 1);
> + if (ret)
> + goto out;
> +
> + ret = hv_pci_query_relations(hdev);
> + if (ret)
> + goto out;
> +
> + ret = hv_pci_enter_d0(hdev);
> + if (ret)
> + goto out;
> +
> + ret = hv_send_resources_allocated(hdev);
> + if (ret)
> + goto out;
> +
> + prepopulate_bars(hbus);
> +
> + hbus->state = hv_pcibus_installed;
> + return 0;
> +out:
> + vmbus_close(hdev->channel);
> + return ret;
> +}
> +
> static const struct hv_vmbus_device_id hv_pci_id_table[] = {
> /* PCI Pass-through Class ID */
> /* 44C4F61D-4444-4400-9D52-802E27EDE19F */
> @@ -2751,6 +2825,8 @@ static int hv_pci_remove(struct hv_device *hdev)
> .id_table = hv_pci_id_table,
> .probe = hv_pci_probe,
> .remove = hv_pci_remove,
> + .suspend = hv_pci_suspend,
> + .resume = hv_pci_resume,
> };
>
> static void __exit exit_hv_pci_drv(void)
> --
> 1.8.3.1
>

\
 
 \ /
  Last update: 2019-09-26 18:31    [W:0.044 / U:6.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site