lkml.org 
[lkml]   [2019]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/3] soc: amlogic: Add support for Secure power domains controller
Date
Jianxin Pan <jianxin.pan@amlogic.com> writes:

> Hi Kevin,
>
> Thanks for your review. Please see my comments below.
>
>
> On 2019/9/26 6:41, Kevin Hilman wrote:
>> Hi Jianxin,
>>
>> Jianxin Pan <jianxin.pan@amlogic.com> writes:
>>
>>> Add support for the Amlogic Secure Power controller. In A1/C1 series, power
>>> control registers are in secure domain, and should be accessed by smc.
>>>
>>> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
>>> Signed-off-by: Zhiqiang Liang <zhiqiang.liang@amlogic.com>
>>
>> Thanks for the new power domain driver.
>>
>>> ---
>>> drivers/soc/amlogic/Kconfig | 13 +++
>>> drivers/soc/amlogic/Makefile | 1 +
>>> drivers/soc/amlogic/meson-secure-pwrc.c | 182 ++++++++++++++++++++++++++++++++
>>> 3 files changed, 196 insertions(+)
>>> create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c
>>>
>>> diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
>>> index bc2c912..6cb06e7 100644
>>> --- a/drivers/soc/amlogic/Kconfig
>>> +++ b/drivers/soc/amlogic/Kconfig
>>> @@ -48,6 +48,19 @@ config MESON_EE_PM_DOMAINS
>>> Say yes to expose Amlogic Meson Everything-Else Power Domains as
>>> Generic Power Domains.
>>>
>>> +config MESON_SECURE_PM_DOMAINS
>>> + bool "Amlogic Meson Secure Power Domains driver"
>>> + depends on ARCH_MESON || COMPILE_TEST
>>> + depends on PM && OF
>>> + depends on HAVE_ARM_SMCCC
>>> + default ARCH_MESON
>>> + select PM_GENERIC_DOMAINS
>>> + select PM_GENERIC_DOMAINS_OF
>>> + help
>>> + Support for the power controller on Amlogic A1/C1 series.
>>> + Say yes to expose Amlogic Meson Secure Power Domains as Generic
>>> + Power Domains.
>>> +
>>> config MESON_MX_SOCINFO
>>> bool "Amlogic Meson MX SoC Information driver"
>>> depends on ARCH_MESON || COMPILE_TEST
>>> diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
>>> index de79d044..7b8c5d3 100644
>>> --- a/drivers/soc/amlogic/Makefile
>>> +++ b/drivers/soc/amlogic/Makefile
>>> @@ -5,3 +5,4 @@ obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
>>> obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
>>> obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
>>> obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o
>>> +obj-$(CONFIG_MESON_SECURE_PM_DOMAINS) += meson-secure-pwrc.o
>>> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
>>> new file mode 100644
>>> index 00000000..00c7232
>>> --- /dev/null
>>> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
>>> @@ -0,0 +1,182 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> [...]
>>> +
>>> +static bool pwrc_secure_get_power(struct meson_secure_pwrc_domain *pwrc_domain)
>>> +{
>>> + struct arm_smccc_res res;
>>> +
>>> + arm_smccc_smc(SMC_PWRC_GET, pwrc_domain->index, 0,
>>> + 0, 0, 0, 0, 0, &res);
>>> +
>>> + return res.a0 & 0x1;
>>
>> Please use a #define with a readable name for this mask.
>> The return type of this smc is bool. I will remove 0x1 mask in next version.
>
> Another question about smc:
> In this driver, no share memory is needed, and I use arm_smccc_smc() directly.
> Should I add secure-monitor = <&sm> in dtb and use meson_sm_call() from sm driver instead?

Yes, that would be preferred.

>>> +}
>>
>> What does the return value for this function mean? Does true mean
>> "powered off" or "powered on">
> The return vaule for SMC_PWRC_GET :
> 0 -> power on
> 1 -> power off> See the rename I just did on the ee-pwrc driver:
>> https://lore.kernel.org/linux-amlogic/20190925213528.21515-2-khilman@kernel.org/
>> I will follow and rename to _is_off() in the next verson.
>>> +static int meson_secure_pwrc_off(struct generic_pm_domain *domain)
>>> +{
>>> + struct arm_smccc_res res;
>>> + struct meson_secure_pwrc_domain *pwrc_domain =
> [...]
>>> +
>>> +#define SEC_PD(__name, __flag) \
>>> +{ \
>>> + .name = #__name, \
>>> + .index = PWRC_##__name##_ID, \
>>> + .get_power = pwrc_secure_get_power, \
>>> + .flags = __flag, \
>>> +}
>>> +
>>> +static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>>> + SEC_PD(DSPA, 0),
>>> + SEC_PD(DSPB, 0),
>>> + SEC_PD(UART, GENPD_FLAG_ALWAYS_ON),
>>
>> This flag should only be used for domains where there are no linux
>> drivers.
>>
>> Rather than using this flag, you need to add a 'power-domain' property
>> to the uart driver in DT, and then update the meson_uart driver to use
>> the runtime PM API so that the domain is enabled whenever the UART is in
>> use.
>
> PM_UART Power domain is shared by uart, msr, jtag and cec.
> Uart should keep working in BL31, after kernel suspend and before kernel resume.

OK.

>>
>>> + SEC_PD(DMC, GENPD_FLAG_ALWAYS_ON),
>>
>> Please explain the need for ALWAYS_ON.
>>
> PM_DMC is used for DDR PHY ana/dig and DMC.
> There is no linux drver for them, and it should be always on.
>
> I will add comments for all these always on domains.

OK, thank you.


Kevin

\
 
 \ /
  Last update: 2019-09-26 18:24    [W:0.101 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site