lkml.org 
[lkml]   [2019]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED
From
Date
Jacek

On 9/25/19 4:31 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/25/19 7:46 PM, Dan Murphy wrote:
>> Update the document to be consistent in case when using LED.
> s/LED/"LED"/.

ACK


>
>> This should be capital throughout the document.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>> Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> index 1b66a413fb9d..bfe2805c5534 100644
>> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> @@ -1,4 +1,4 @@
>> -Binding for TI/National Semiconductor LP55xx Led Drivers
>> +Binding for TI/National Semiconductor LP55xx LED Drivers
>>
>> Required properties:
>> - compatible: one of
>> @@ -12,8 +12,8 @@ Required properties:
>> - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
>>
>> Each child has own specific current settings
>> -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
>> -- max-cur: Maximun current at each led channel.
>> +- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
>> +- max-cur: Maximun current at each LED channel.
>>
>> Optional properties:
>> - enable-gpio: GPIO attached to the chip's enable pin
>>

\
 
 \ /
  Last update: 2019-09-26 13:55    [W:0.058 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site