lkml.org 
[lkml]   [2019]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: move Non-standard serial drivers menu to the Serial drivers menu
Date
From: Randy Dunlap <rdunlap@infradead.org>

Since Non-standard serial port drivers are also Serial drivers,
move the "Non-standard serial port support" menu to be under/in
the "Serial drivers" menu. With this move, the "Serial drivers"
menu contains (a) 8250/16550 support, (b) non-8250 support, and
(c) non-standard serial port support.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
---
drivers/tty/Kconfig | 119 -----------------------------------
drivers/tty/serial/Kconfig | 119 +++++++++++++++++++++++++++++++++++
2 files changed, 119 insertions(+), 119 deletions(-)

--- lnx-53.orig/drivers/tty/Kconfig
+++ lnx-53/drivers/tty/Kconfig
@@ -151,125 +151,6 @@ config LEGACY_PTY_COUNT
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.

-config SERIAL_NONSTANDARD
- bool "Non-standard serial port support"
- depends on HAS_IOMEM
- ---help---
- Say Y here if you have any non-standard serial boards -- boards
- which aren't supported using the standard "dumb" serial driver.
- This includes intelligent serial boards such as Cyclades,
- Digiboards, etc. These are usually used for systems that need many
- serial ports because they serve many terminals or dial-in
- connections.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about non-standard serial boards.
-
- Most people can say N here.
-
-config ROCKETPORT
- tristate "Comtrol RocketPort support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- help
- This driver supports Comtrol RocketPort and RocketModem PCI boards.
- These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
- modems. For information about the RocketPort/RocketModem boards
- and this driver read <file:Documentation/driver-api/serial/rocket.rst>.
-
- To compile this driver as a module, choose M here: the
- module will be called rocket.
-
- If you want to compile this driver into the kernel, say Y here. If
- you don't have a Comtrol RocketPort/RocketModem card installed, say N.
-
-config CYCLADES
- tristate "Cyclades async mux support"
- depends on SERIAL_NONSTANDARD && (PCI || ISA)
- select FW_LOADER
- ---help---
- This driver supports Cyclades Z and Y multiserial boards.
- You would need something like this to connect more than two modems to
- your Linux box, for instance in order to become a dial-in server.
-
- For information about the Cyclades-Z card, read
- <file:Documentation/driver-api/serial/cyclades_z.rst>.
-
- To compile this driver as a module, choose M here: the
- module will be called cyclades.
-
- If you haven't heard about it, it's safe to say N.
-
-config CYZ_INTR
- bool "Cyclades-Z interrupt mode operation"
- depends on CYCLADES && PCI
- help
- The Cyclades-Z family of multiport cards allows 2 (two) driver op
- modes: polling and interrupt. In polling mode, the driver will check
- the status of the Cyclades-Z ports every certain amount of time
- (which is called polling cycle and is configurable). In interrupt
- mode, it will use an interrupt line (IRQ) in order to check the
- status of the Cyclades-Z ports. The default op mode is polling. If
- unsure, say N.
-
-config MOXA_INTELLIO
- tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- select FW_LOADER
- help
- Say Y here if you have a Moxa Intellio multiport serial card.
-
- To compile this driver as a module, choose M here: the
- module will be called moxa.
-
-config MOXA_SMARTIO
- tristate "Moxa SmartIO support v. 2.0"
- depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
- help
- Say Y here if you have a Moxa SmartIO multiport serial card and/or
- want to help develop a new version of this driver.
-
- This is upgraded (1.9.1) driver from original Moxa drivers with
- changes finally resulting in PCI probing.
-
- This driver can also be built as a module. The module will be called
- mxser. If you want to do that, say M here.
-
-config SYNCLINK
- tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
- help
- Provides support for the SyncLink ISA and PCI multiprotocol serial
- adapters. These adapters support asynchronous and HDLC bit
- synchronous communication up to 10Mbps (PCI adapter).
-
- This driver can only be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclink. If you want to do that, say M
- here.
-
-config SYNCLINKMP
- tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD && PCI
- help
- Enable support for the SyncLink Multiport (2 or 4 ports)
- serial adapter, running asynchronous and HDLC communications up
- to 2.048Mbps. Each ports is independently selectable for
- RS-232, V.35, RS-449, RS-530, and X.21
-
- This driver may be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclinkmp. If you want to do that, say M
- here.
-
-config SYNCLINK_GT
- tristate "SyncLink GT/AC support"
- depends on SERIAL_NONSTANDARD && PCI
- help
- Support for SyncLink GT and SyncLink AC families of
- synchronous and asynchronous serial adapters
- manufactured by Microgate Systems, Ltd. (www.microgate.com)
-
config NOZOMI
tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
depends on PCI
--- lnx-53.orig/drivers/tty/serial/Kconfig
+++ lnx-53/drivers/tty/serial/Kconfig
@@ -1598,6 +1598,125 @@ config SERIAL_MILBEAUT_USIO_CONSOLE
receives all kernel messages and warnings and which allows logins in
single user mode).

+config SERIAL_NONSTANDARD
+ bool "Non-standard serial port support"
+ depends on HAS_IOMEM
+ ---help---
+ Say Y here if you have any non-standard serial boards -- boards
+ which aren't supported using the standard "dumb" serial driver.
+ This includes intelligent serial boards such as Cyclades,
+ Digiboards, etc. These are usually used for systems that need many
+ serial ports because they serve many terminals or dial-in
+ connections.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about non-standard serial boards.
+
+ Most people can say N here.
+
+config ROCKETPORT
+ tristate "Comtrol RocketPort support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ help
+ This driver supports Comtrol RocketPort and RocketModem PCI boards.
+ These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+ modems. For information about the RocketPort/RocketModem boards
+ and this driver read <file:Documentation/driver-api/serial/rocket.rst>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rocket.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+ tristate "Cyclades async mux support"
+ depends on SERIAL_NONSTANDARD && (PCI || ISA)
+ select FW_LOADER
+ ---help---
+ This driver supports Cyclades Z and Y multiserial boards.
+ You would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ For information about the Cyclades-Z card, read
+ <file:Documentation/driver-api/serial/cyclades_z.rst>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyclades.
+
+ If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+ bool "Cyclades-Z interrupt mode operation"
+ depends on CYCLADES && PCI
+ help
+ The Cyclades-Z family of multiport cards allows 2 (two) driver op
+ modes: polling and interrupt. In polling mode, the driver will check
+ the status of the Cyclades-Z ports every certain amount of time
+ (which is called polling cycle and is configurable). In interrupt
+ mode, it will use an interrupt line (IRQ) in order to check the
+ status of the Cyclades-Z ports. The default op mode is polling. If
+ unsure, say N.
+
+config MOXA_INTELLIO
+ tristate "Moxa Intellio support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ select FW_LOADER
+ help
+ Say Y here if you have a Moxa Intellio multiport serial card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxa.
+
+config MOXA_SMARTIO
+ tristate "Moxa SmartIO support v. 2.0"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ This driver can also be built as a module. The module will be called
+ mxser. If you want to do that, say M here.
+
+config SYNCLINK
+ tristate "Microgate SyncLink card support"
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ help
+ Provides support for the SyncLink ISA and PCI multiprotocol serial
+ adapters. These adapters support asynchronous and HDLC bit
+ synchronous communication up to 10Mbps (PCI adapter).
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclink. If you want to do that, say M
+ here.
+
+config SYNCLINKMP
+ tristate "SyncLink Multiport support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Enable support for the SyncLink Multiport (2 or 4 ports)
+ serial adapter, running asynchronous and HDLC communications up
+ to 2.048Mbps. Each ports is independently selectable for
+ RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclinkmp. If you want to do that, say M
+ here.
+
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
endmenu

config SERIAL_MCTRL_GPIO
\
 
 \ /
  Last update: 2019-09-26 03:17    [W:0.067 / U:4.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site