lkml.org 
[lkml]   [2019]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] PCI: aardvark: Fix PCI_EXP_RTCTL register configuration
On Fri, 14 Jun 2019 12:10:59 +0200
Remi Pommarel <repk@triplefau.lt> wrote:

> PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it
> should not modify other interrupts' mask. The ISR mask polarity was also
> inverted, when PCI_EXP_RTCTL_PMEIE is set PCIE_MSG_PM_PME_MASK mask bit
> should actually be cleared.
>
> Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
> Signed-off-by: Remi Pommarel <repk@triplefau.lt>

Sorry for the long delay, but:

Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

I did verify that indeed the polarity of the PME interrupt bit is
different between the standard PCI_EXP_RTCTL register and the
Aardvark-specific ISR0 mask register. And obviously, we shouldn't
clobber other bits of the ISR0 mask register when changing the PME
interrupt enable/disable state.

I did a quick test with a E1000E NIC and it worked fine.

Thanks!

Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2019-09-25 14:09    [W:0.100 / U:4.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site