lkml.org 
[lkml]   [2019]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/11] of: Fix DMA configuration for non-DT masters
Date
Hi All,
this series tries to address one of the issues blocking us from
upstreaming Broadcom's STB PCIe controller[1]. Namely, the fact that
devices not represented in DT which sit behind a PCI bus fail to get the
bus' DMA addressing constraints.

This is due to the fact that of_dma_configure() assumes it's receiving a
DT node representing the device being configured, as opposed to the PCIe
bridge node we currently pass. This causes the code to directly jump
into PCI's parent node when checking for 'dma-ranges' and misses
whatever was set there.

To address this I create a new API in OF - inspired from Robin Murphys
original proposal[2] - which accepts a bus DT node as it's input in
order to configure a device's DMA constraints. The changes go deep into
of/address.c's implementation, as a device being having a DT node
assumption was pretty strong.

On top of this work, I also cleaned up of_dma_configure() removing its
redundant arguments and creating an alternative function for the special cases
not applicable to either the above case or the default usage.

IMO the resulting functions are more explicit. They will probably
surface some hacky usages that can be properly fixed as I show with the
DT fixes on the Layerscape platform.

This was also tested on a Raspberry Pi 4 with a custom PCIe driver and
on a Seattle AMD board.

Regards,
Nicolas

[1] https://patchwork.kernel.org/patch/9650345/#20294961
[2] https://patchwork.kernel.org/patch/9650345/

---

Nicolas Saenz Julienne (11):
of: address: clean-up unused variable in of_dma_get_range()
of: base: introduce __of_n_*_cells_parent()
of: address: use parent DT node in bus->count_cells()
of: address: introduce of_translate_dma_address_parent()
of: expose __of_get_dma_parent() to OF subsystem
of: address: use parent OF node in of_dma_get_range()
dts: arm64: layerscape: add dma-ranges property to qoric-mc node
dts: arm64: layerscape: add dma-ranges property to pcie nodes
of: device: remove comment in of_dma_configure()
of: device: introduce of_dma_configure_parent()
of: simplify of_dma_config()'s arguments

.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 1 +
.../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 +
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 1 +
drivers/base/platform.c | 2 +-
drivers/bcma/main.c | 2 +-
drivers/bus/fsl-mc/fsl-mc-bus.c | 2 +-
drivers/dma/qcom/hidma_mgmt.c | 2 +-
drivers/gpu/drm/etnaviv/etnaviv_drv.c | 2 +-
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 2 +-
drivers/gpu/drm/sun4i/sun4i_backend.c | 2 +-
drivers/gpu/drm/xen/xen_drm_front.c | 2 +-
drivers/gpu/host1x/bus.c | 4 +-
drivers/media/platform/qcom/venus/firmware.c | 2 +-
drivers/media/platform/s5p-mfc/s5p_mfc.c | 2 +-
drivers/of/address.c | 136 +++++++++---------
drivers/of/base.c | 69 +++++++--
drivers/of/device.c | 59 +++++++-
drivers/of/of_private.h | 5 +
drivers/pci/pci-driver.c | 3 +-
drivers/xen/gntdev.c | 2 +-
include/linux/of_address.h | 8 +-
include/linux/of_device.h | 23 ++-
22 files changed, 223 insertions(+), 113 deletions(-)

--
2.23.0

\
 
 \ /
  Last update: 2019-09-24 20:14    [W:0.239 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site