lkml.org 
[lkml]   [2019]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 00/21] Refine memblock API
On Mon, Jan 21, 2019 at 2:05 AM Mike Rapoport <rppt@linux.ibm.com> wrote:
>
> Hi,
>
> Current memblock API is quite extensive and, which is more annoying,
> duplicated. Except the low-level functions that allow searching for a free
> memory region and marking it as reserved, memblock provides three (well,
> two and a half) sets of functions to allocate memory. There are several
> overlapping functions that return a physical address and there are
> functions that return virtual address. Those that return the virtual
> address may also clear the allocated memory. And, on top of all that, some
> allocators panic and some return NULL in case of error.
>
> This set tries to reduce the mess, and trim down the amount of memblock
> allocation methods.
>
> Patches 1-10 consolidate the functions that return physical address of
> the allocated memory
>
> Patches 11-13 are some trivial cleanups
>
> Patches 14-19 add checks for the return value of memblock_alloc*() and
> panics in case of errors. The patches 14-18 include some minor refactoring
> to have better readability of the resulting code and patch 19 is a
> mechanical addition of
>
> if (!ptr)
> panic();
>
> after memblock_alloc*() calls.
>
> And, finally, patches 20 and 21 remove panic() calls memblock and _nopanic
> variants from memblock.
>
> v2 changes:
> * replace some more %lu with %zu
> * remove panics where they are not needed in s390 and in printk
> * collect Acked-by and Reviewed-by.
>
>
> Christophe Leroy (1):
> powerpc: use memblock functions returning virtual address
>
> Mike Rapoport (20):
> openrisc: prefer memblock APIs returning virtual address
> memblock: replace memblock_alloc_base(ANYWHERE) with memblock_phys_alloc
> memblock: drop memblock_alloc_base_nid()
> memblock: emphasize that memblock_alloc_range() returns a physical address
> memblock: memblock_phys_alloc_try_nid(): don't panic
> memblock: memblock_phys_alloc(): don't panic
> memblock: drop __memblock_alloc_base()
> memblock: drop memblock_alloc_base()
> memblock: refactor internal allocation functions
> memblock: make memblock_find_in_range_node() and choose_memblock_flags() static
> arch: use memblock_alloc() instead of memblock_alloc_from(size, align, 0)
> arch: don't memset(0) memory returned by memblock_alloc()
> ia64: add checks for the return value of memblock_alloc*()
> sparc: add checks for the return value of memblock_alloc*()
> mm/percpu: add checks for the return value of memblock_alloc*()
> init/main: add checks for the return value of memblock_alloc*()
> swiotlb: add checks for the return value of memblock_alloc*()
> treewide: add checks for the return value of memblock_alloc*()
> memblock: memblock_alloc_try_nid: don't panic
> memblock: drop memblock_alloc_*_nopanic() variants
>
I know it's rather late, but this patch broke the Etnaviv 3D graphics
in my i.MX6Q.

When I try to use the 3D, it returns some errors and the dmesg log
shows some memory allocation errors too:
[ 3.682347] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops)
[ 3.688669] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops)
[ 3.695099] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops)
[ 3.700800] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
[ 3.723013] etnaviv-gpu 130000.gpu: command buffer outside valid
memory window
[ 3.731308] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
[ 3.752437] etnaviv-gpu 134000.gpu: command buffer outside valid
memory window
[ 3.760583] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
[ 3.766766] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
[ 3.776131] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0

# glmark2-es2-drm
Error creating gpu
Error: eglCreateWindowSurface failed with error: 0x3009
Error: eglCreateWindowSurface failed with error: 0x3009
Error: CanvasGeneric: Invalid EGL state
Error: main: Could not initialize canvas


Before this patch:

[ 3.691995] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops)
[ 3.698356] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops)
[ 3.704792] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops)
[ 3.710488] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
[ 3.733649] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
[ 3.756115] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
[ 3.762250] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
[ 3.771432] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0

and the 3D gemos work without this.

I don't know enough about the i.MX6 nor the 3D accelerator to know how
to fix it.
I am hoping someone in the know might have some suggestions.

> arch/alpha/kernel/core_cia.c | 5 +-
> arch/alpha/kernel/core_marvel.c | 6 +
> arch/alpha/kernel/pci-noop.c | 13 +-
> arch/alpha/kernel/pci.c | 11 +-
> arch/alpha/kernel/pci_iommu.c | 16 +-
> arch/alpha/kernel/setup.c | 2 +-
> arch/arc/kernel/unwind.c | 3 +-
> arch/arc/mm/highmem.c | 4 +
> arch/arm/kernel/setup.c | 6 +
> arch/arm/mm/init.c | 6 +-
> arch/arm/mm/mmu.c | 14 +-
> arch/arm64/kernel/setup.c | 8 +-
> arch/arm64/mm/kasan_init.c | 10 ++
> arch/arm64/mm/mmu.c | 2 +
> arch/arm64/mm/numa.c | 4 +
> arch/c6x/mm/dma-coherent.c | 4 +
> arch/c6x/mm/init.c | 4 +-
> arch/csky/mm/highmem.c | 5 +
> arch/h8300/mm/init.c | 4 +-
> arch/ia64/kernel/mca.c | 25 +--
> arch/ia64/mm/contig.c | 8 +-
> arch/ia64/mm/discontig.c | 4 +
> arch/ia64/mm/init.c | 38 ++++-
> arch/ia64/mm/tlb.c | 6 +
> arch/ia64/sn/kernel/io_common.c | 3 +
> arch/ia64/sn/kernel/setup.c | 12 +-
> arch/m68k/atari/stram.c | 4 +
> arch/m68k/mm/init.c | 3 +
> arch/m68k/mm/mcfmmu.c | 7 +-
> arch/m68k/mm/motorola.c | 9 ++
> arch/m68k/mm/sun3mmu.c | 6 +
> arch/m68k/sun3/sun3dvma.c | 3 +
> arch/microblaze/mm/init.c | 10 +-
> arch/mips/cavium-octeon/dma-octeon.c | 3 +
> arch/mips/kernel/setup.c | 3 +
> arch/mips/kernel/traps.c | 5 +-
> arch/mips/mm/init.c | 5 +
> arch/nds32/mm/init.c | 12 ++
> arch/openrisc/mm/init.c | 5 +-
> arch/openrisc/mm/ioremap.c | 8 +-
> arch/powerpc/kernel/dt_cpu_ftrs.c | 8 +-
> arch/powerpc/kernel/irq.c | 5 -
> arch/powerpc/kernel/paca.c | 6 +-
> arch/powerpc/kernel/pci_32.c | 3 +
> arch/powerpc/kernel/prom.c | 5 +-
> arch/powerpc/kernel/rtas.c | 6 +-
> arch/powerpc/kernel/setup-common.c | 3 +
> arch/powerpc/kernel/setup_32.c | 26 ++--
> arch/powerpc/kernel/setup_64.c | 4 +
> arch/powerpc/lib/alloc.c | 3 +
> arch/powerpc/mm/hash_utils_64.c | 11 +-
> arch/powerpc/mm/mmu_context_nohash.c | 9 ++
> arch/powerpc/mm/numa.c | 4 +
> arch/powerpc/mm/pgtable-book3e.c | 12 +-
> arch/powerpc/mm/pgtable-book3s64.c | 3 +
> arch/powerpc/mm/pgtable-radix.c | 9 +-
> arch/powerpc/mm/ppc_mmu_32.c | 3 +
> arch/powerpc/platforms/pasemi/iommu.c | 3 +
> arch/powerpc/platforms/powermac/nvram.c | 3 +
> arch/powerpc/platforms/powernv/opal.c | 3 +
> arch/powerpc/platforms/powernv/pci-ioda.c | 8 +
> arch/powerpc/platforms/ps3/setup.c | 3 +
> arch/powerpc/sysdev/dart_iommu.c | 3 +
> arch/powerpc/sysdev/msi_bitmap.c | 3 +
> arch/s390/kernel/crash_dump.c | 3 +
> arch/s390/kernel/setup.c | 16 ++
> arch/s390/kernel/smp.c | 9 +-
> arch/s390/kernel/topology.c | 6 +
> arch/s390/numa/mode_emu.c | 3 +
> arch/s390/numa/numa.c | 6 +-
> arch/sh/boards/mach-ap325rxa/setup.c | 5 +-
> arch/sh/boards/mach-ecovec24/setup.c | 10 +-
> arch/sh/boards/mach-kfr2r09/setup.c | 5 +-
> arch/sh/boards/mach-migor/setup.c | 5 +-
> arch/sh/boards/mach-se/7724/setup.c | 10 +-
> arch/sh/kernel/machine_kexec.c | 3 +-
> arch/sh/mm/init.c | 8 +-
> arch/sh/mm/numa.c | 4 +
> arch/sparc/kernel/prom_32.c | 6 +-
> arch/sparc/kernel/setup_64.c | 6 +
> arch/sparc/kernel/smp_64.c | 12 ++
> arch/sparc/mm/init_32.c | 2 +-
> arch/sparc/mm/init_64.c | 11 ++
> arch/sparc/mm/srmmu.c | 18 ++-
> arch/um/drivers/net_kern.c | 3 +
> arch/um/drivers/vector_kern.c | 3 +
> arch/um/kernel/initrd.c | 2 +
> arch/um/kernel/mem.c | 16 ++
> arch/unicore32/kernel/setup.c | 4 +
> arch/unicore32/mm/mmu.c | 15 +-
> arch/x86/kernel/acpi/boot.c | 3 +
> arch/x86/kernel/apic/io_apic.c | 5 +
> arch/x86/kernel/e820.c | 5 +-
> arch/x86/kernel/setup_percpu.c | 10 +-
> arch/x86/mm/kasan_init_64.c | 14 +-
> arch/x86/mm/numa.c | 12 +-
> arch/x86/platform/olpc/olpc_dt.c | 3 +
> arch/x86/xen/p2m.c | 11 +-
> arch/xtensa/mm/kasan_init.c | 10 +-
> arch/xtensa/mm/mmu.c | 3 +
> drivers/clk/ti/clk.c | 3 +
> drivers/firmware/memmap.c | 2 +-
> drivers/macintosh/smu.c | 5 +-
> drivers/of/fdt.c | 8 +-
> drivers/of/of_reserved_mem.c | 7 +-
> drivers/of/unittest.c | 8 +-
> drivers/usb/early/xhci-dbc.c | 2 +-
> drivers/xen/swiotlb-xen.c | 7 +-
> include/linux/memblock.h | 59 +------
> init/main.c | 26 +++-
> kernel/dma/swiotlb.c | 21 ++-
> kernel/power/snapshot.c | 3 +
> kernel/printk/printk.c | 9 +-
> lib/cpumask.c | 3 +
> mm/cma.c | 10 +-
> mm/kasan/init.c | 10 +-
> mm/memblock.c | 249 ++++++++++--------------------
> mm/page_alloc.c | 10 +-
> mm/page_ext.c | 2 +-
> mm/percpu.c | 84 +++++++---
> mm/sparse.c | 25 ++-
> 121 files changed, 860 insertions(+), 412 deletions(-)
>
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2019-09-24 19:53    [W:0.131 / U:9.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site