lkml.org 
[lkml]   [2019]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT v4 6/8] ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos5250
Date
Multi Core Timer node has interrupts routed to two different parents -
GIC and combiner. This was modeled with a interrupt-map within a
subnode but can be expressed in an easier and more common way, directly
in the node itself.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Not tested.

Changes since v3:
1. Use interrupts-extended instead of interrupts-map.
---
arch/arm/boot/dts/exynos5250.dtsi | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 7a01349317a3..a549eafd2c64 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -236,25 +236,14 @@
timer@101c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&mct_map>;
- interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
- <4 0>, <5 0>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
-
- mct_map: mct-map {
- #interrupt-cells = <2>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0x0 0 &combiner 23 3>,
- <0x1 0 &combiner 23 4>,
- <0x2 0 &combiner 25 2>,
- <0x3 0 &combiner 25 3>,
- <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
- };
+ interrupts-extended = <&combiner 23 3>,
+ <&combiner 23 4>,
+ <&combiner 25 2>,
+ <&combiner 25 3>,
+ <&gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
};

pinctrl_0: pinctrl@11400000 {
--
2.17.1
\
 
 \ /
  Last update: 2019-09-23 18:15    [W:0.227 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site