lkml.org 
[lkml]   [2019]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] reset: add support for the Meson-A1 SoC Reset Controller
Date
The number of RESET registers and offset of RESET_LEVEL register for
Meson-A1 are different from previous SoCs, In order to describe these
differences, we introduce the struct meson_reset_param.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/reset/reset-meson.c | 35 ++++++++++++++++++++++++++++-------
1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index 7d05d76..94d7ba8 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -15,12 +15,16 @@
#include <linux/types.h>
#include <linux/of_device.h>

-#define REG_COUNT 8
#define BITS_PER_REG 32
-#define LEVEL_OFFSET 0x7c
+
+struct meson_reset_param {
+ int reg_count;
+ int level_offset;
+};

struct meson_reset {
void __iomem *reg_base;
+ const struct meson_reset_param *param;
struct reset_controller_dev rcdev;
spinlock_t lock;
};
@@ -46,10 +50,12 @@ static int meson_reset_level(struct reset_controller_dev *rcdev,
container_of(rcdev, struct meson_reset, rcdev);
unsigned int bank = id / BITS_PER_REG;
unsigned int offset = id % BITS_PER_REG;
- void __iomem *reg_addr = data->reg_base + LEVEL_OFFSET + (bank << 2);
+ void __iomem *reg_addr;
unsigned long flags;
u32 reg;

+ reg_addr = data->reg_base + data->param->level_offset + (bank << 2);
+
spin_lock_irqsave(&data->lock, flags);

reg = readl(reg_addr);
@@ -81,10 +87,21 @@ static const struct reset_control_ops meson_reset_ops = {
.deassert = meson_reset_deassert,
};

+static const struct meson_reset_param meson8b_param = {
+ .reg_count = 8,
+ .level_offset = 0x7c,
+};
+
+static const struct meson_reset_param meson_a1_param = {
+ .reg_count = 3,
+ .level_offset = 0x40,
+};
+
static const struct of_device_id meson_reset_dt_ids[] = {
- { .compatible = "amlogic,meson8b-reset" },
- { .compatible = "amlogic,meson-gxbb-reset" },
- { .compatible = "amlogic,meson-axg-reset" },
+ { .compatible = "amlogic,meson8b-reset", .data = &meson8b_param},
+ { .compatible = "amlogic,meson-gxbb-reset", .data = &meson8b_param},
+ { .compatible = "amlogic,meson-axg-reset", .data = &meson8b_param},
+ { .compatible = "amlogic,meson-a1-reset", .data = &meson_a1_param},
{ /* sentinel */ },
};

@@ -102,12 +119,16 @@ static int meson_reset_probe(struct platform_device *pdev)
if (IS_ERR(data->reg_base))
return PTR_ERR(data->reg_base);

+ data->param = of_device_get_match_data(&pdev->dev);
+ if (!data->param)
+ return -ENODEV;
+
platform_set_drvdata(pdev, data);

spin_lock_init(&data->lock);

data->rcdev.owner = THIS_MODULE;
- data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
+ data->rcdev.nr_resets = data->param->reg_count * BITS_PER_REG;
data->rcdev.ops = &meson_reset_ops;
data->rcdev.of_node = pdev->dev.of_node;

--
2.7.4
\
 
 \ /
  Last update: 2019-09-23 10:34    [W:0.118 / U:1.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site