lkml.org 
[lkml]   [2019]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 5/7] USB: serial: f81232: Set F81534A serial port with RS232 mode
Date
The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device
and the serial ports are default disabled. Each port contains max 3 pins
GPIO and the 3 pins are default pull high with input mode.

When the serial port had activated (running probe()), we'll transform the
3 pins from GPIO function publicly to control Tranceiver privately use.
We'll default set to 0/0/1 for control transceiver to RS232 mode.

Otherwise, If the serial port is not active, the 3 pins is in GPIO mode
and controlled by global GPIO device with VID/PID: 2c42/16f8.

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
---
drivers/usb/serial/f81232.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 36a17aedc2ae..01cb5a5ea1d2 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -96,6 +96,15 @@ MODULE_DEVICE_TABLE(usb, all_serial_id_table);
#define F81534A_TRIGGER_MULTPILE_4X BIT(3)
#define F81534A_FIFO_128BYTE (BIT(1) | BIT(0))

+/* Serial port self GPIO control, 2bytes [control&output data][input data] */
+#define F81534A_GPIO_REG 0x10e
+#define F81534A_GPIO_MODE2_DIR BIT(6) /* 1: input, 0: output */
+#define F81534A_GPIO_MODE1_DIR BIT(5)
+#define F81534A_GPIO_MODE0_DIR BIT(4)
+#define F81534A_GPIO_MODE2_OUTPUT BIT(2)
+#define F81534A_GPIO_MODE1_OUTPUT BIT(1)
+#define F81534A_GPIO_MODE0_OUTPUT BIT(0)
+
struct f81232_private {
struct mutex lock;
u8 modem_control;
@@ -866,6 +875,14 @@ static int f81232_port_probe(struct usb_serial_port *port)

static int f81534a_port_probe(struct usb_serial_port *port)
{
+ int status;
+
+ /* tri-state with pull-high, default RS232 Mode */
+ status = f81232_set_register(port, F81534A_GPIO_REG,
+ F81534A_GPIO_MODE2_DIR);
+ if (status)
+ return status;
+
return f81232_port_probe(port);
}

--
2.17.1
\
 
 \ /
  Last update: 2019-09-23 04:25    [W:0.175 / U:4.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site