lkml.org 
[lkml]   [2019]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 3/4] MIPS: CI20: DTS: Add Leds
Adding leds and related triggers.

Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
---
arch/mips/boot/dts/ingenic/ci20.dts | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index c62c36ae94c2..37b93166bf22 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -25,6 +25,34 @@
0x30000000 0x30000000>;
};

+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "ci20:red:led0";
+ gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+
+ led1 {
+ label = "ci20:red:led1";
+ gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "nand-disk";
+ };
+
+ led2 {
+ label = "ci20:red:led2";
+ gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu1";
+ };
+
+ led3 {
+ label = "ci20:red:led3";
+ gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ };
+ };
+
eth0_power: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "eth0_power";
--
2.20.1
\
 
 \ /
  Last update: 2019-09-22 22:13    [W:0.108 / U:4.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site