lkml.org 
[lkml]   [2019]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/5] irqchip/irq-bcm7038-l1: Add PM support
On Fri, 13 Sep 2019 12:15:38 -0700
Florian Fainelli <f.fainelli@gmail.com> wrote:

> From: Justin Chen <justinpopo6@gmail.com>
>
> The current l1 controller does not mask any interrupts when dropping
> into suspend. This mean we can receive unexpected wake up sources.
> Modified MIPS l1 controller to mask the all non-wake interrupts before
> dropping into suspend.
>
> Signed-off-by: Justin Chen <justinpopo6@gmail.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> drivers/irqchip/irq-bcm7038-l1.c | 98 ++++++++++++++++++++++++++++++++
> 1 file changed, 98 insertions(+)
>
> diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
> index fc75c61233aa..f5e4ff5251ab 100644
> --- a/drivers/irqchip/irq-bcm7038-l1.c
> +++ b/drivers/irqchip/irq-bcm7038-l1.c
> @@ -27,6 +27,7 @@
> #include <linux/types.h>
> #include <linux/irqchip.h>
> #include <linux/irqchip/chained_irq.h>
> +#include <linux/syscore_ops.h>
>
> #define IRQS_PER_WORD 32
> #define REG_BYTES_PER_IRQ_WORD (sizeof(u32) * 4)
> @@ -39,6 +40,10 @@ struct bcm7038_l1_chip {
> unsigned int n_words;
> struct irq_domain *domain;
> struct bcm7038_l1_cpu *cpus[NR_CPUS];
> +#ifdef CONFIG_PM_SLEEP
> + struct list_head list;
> + u32 wake_mask[MAX_WORDS];
> +#endif
> u8 affinity[MAX_WORDS * IRQS_PER_WORD];
> };
>
> @@ -47,6 +52,17 @@ struct bcm7038_l1_cpu {
> u32 mask_cache[0];
> };
>
> +/*
> + * We keep a list of bcm7038_l1_chip used for suspend/resume. This hack is
> + * used because the struct chip_type suspend/resume hooks are not called
> + * unless chip_type is hooked onto a generic_chip. Since this driver does
> + * not use generic_chip, we need to manually hook our resume/suspend to
> + * syscore_ops.
> + */
> +#ifdef CONFIG_PM_SLEEP
> +static LIST_HEAD(bcm7038_l1_intcs_list);
> +#endif

nit: this could be moved down to be close to the rest of the PM_SLEEP
ifdefery.

> +
> /*
> * STATUS/MASK_STATUS/MASK_SET/MASK_CLEAR are packed one right after another:
> *
> @@ -287,6 +303,77 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
> return 0;
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int bcm7038_l1_suspend(void)
> +{
> + struct bcm7038_l1_chip *intc;
> + unsigned long flags;
> + int boot_cpu, word;
> +
> + /* Wakeup interrupt should only come from the boot cpu */
> + boot_cpu = cpu_logical_map(smp_processor_id());

What guarantees that you're actually running on the boot CPU at this
point? If that's actually the case, why isn't cpu_logical_map(0) enough?

> +
> + list_for_each_entry(intc, &bcm7038_l1_intcs_list, list) {
> + raw_spin_lock_irqsave(&intc->lock, flags);

And if this can only run on a single CPU, what's the purpose of this
lock?

> + for (word = 0; word < intc->n_words; word++) {
> + l1_writel(~intc->wake_mask[word],
> + intc->cpus[boot_cpu]->map_base +
> + reg_mask_set(intc, word));
> + l1_writel(intc->wake_mask[word],
> + intc->cpus[boot_cpu]->map_base +
> + reg_mask_clr(intc, word));

nit: Please don't split the write address across two lines, it makes it
harder to read.

> + }
> + raw_spin_unlock_irqrestore(&intc->lock, flags);
> + }
> +
> + return 0;
> +}
> +
> +static void bcm7038_l1_resume(void)
> +{
> + struct bcm7038_l1_chip *intc;
> + unsigned long flags;
> + int boot_cpu, word;
> +
> + boot_cpu = cpu_logical_map(smp_processor_id());
> +
> + list_for_each_entry(intc, &bcm7038_l1_intcs_list, list) {
> + raw_spin_lock_irqsave(&intc->lock, flags);
> + for (word = 0; word < intc->n_words; word++) {
> + l1_writel(intc->cpus[boot_cpu]->mask_cache[word],
> + intc->cpus[boot_cpu]->map_base +
> + reg_mask_set(intc, word));
> + l1_writel(~intc->cpus[boot_cpu]->mask_cache[word],
> + intc->cpus[boot_cpu]->map_base +
> + reg_mask_clr(intc, word));
> + }
> + raw_spin_unlock_irqrestore(&intc->lock, flags);
> + }
> +}
> +
> +static struct syscore_ops bcm7038_l1_syscore_ops = {
> + .suspend = bcm7038_l1_suspend,
> + .resume = bcm7038_l1_resume,
> +};
> +
> +static int bcm7038_l1_set_wake(struct irq_data *d, unsigned int on)
> +{
> + struct bcm7038_l1_chip *intc = irq_data_get_irq_chip_data(d);
> + unsigned long flags;
> + u32 word = d->hwirq / IRQS_PER_WORD;
> + u32 mask = BIT(d->hwirq % IRQS_PER_WORD);
> +
> + raw_spin_lock_irqsave(&intc->lock, flags);
> + if (on)
> + intc->wake_mask[word] |= mask;
> + else
> + intc->wake_mask[word] &= ~mask;
> + raw_spin_unlock_irqrestore(&intc->lock, flags);
> +
> + return 0;
> +}
> +#endif
> +
> static struct irq_chip bcm7038_l1_irq_chip = {
> .name = "bcm7038-l1",
> .irq_mask = bcm7038_l1_mask,
> @@ -295,6 +382,9 @@ static struct irq_chip bcm7038_l1_irq_chip = {
> #ifdef CONFIG_SMP
> .irq_cpu_offline = bcm7038_l1_cpu_offline,
> #endif
> +#ifdef CONFIG_PM_SLEEP
> + .irq_set_wake = bcm7038_l1_set_wake,
> +#endif
> };
>
> static int bcm7038_l1_map(struct irq_domain *d, unsigned int virq,
> @@ -340,6 +430,14 @@ int __init bcm7038_l1_of_init(struct device_node *dn,
> goto out_unmap;
> }
>
> +#ifdef CONFIG_PM_SLEEP
> + /* Add bcm7038_l1_chip into a list */
> + INIT_LIST_HEAD(&intc->list);
> + list_add_tail(&intc->list, &bcm7038_l1_intcs_list);

No locking to manipulate this list? Is that safe?

> +
> + register_syscore_ops(&bcm7038_l1_syscore_ops);

Do you really register the syscore_ops for each and every L1 irqchip?

> +#endif
> +
> pr_info("registered BCM7038 L1 intc (%pOF, IRQs: %d)\n",
> dn, IRQS_PER_WORD * intc->n_words);
>

Thanks,

M.
--
Without deviation from the norm, progress is not possible.

\
 
 \ /
  Last update: 2019-09-22 14:32    [W:0.172 / U:2.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site