lkml.org 
[lkml]   [2019]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/5] leds: lm3692x: Print error value on dev_err
Date
This gives a way better idea what is going on.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
drivers/leds/leds-lm3692x.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
index 3d381f2f73d0..487228c2bed2 100644
--- a/drivers/leds/leds-lm3692x.c
+++ b/drivers/leds/leds-lm3692x.c
@@ -174,19 +174,20 @@ static int lm3692x_brightness_set(struct led_classdev *led_cdev,

ret = lm3692x_fault_check(led);
if (ret) {
- dev_err(&led->client->dev, "Cannot read/clear faults\n");
+ dev_err(&led->client->dev, "Cannot read/clear faults: %d\n",
+ ret);
goto out;
}

ret = regmap_write(led->regmap, LM3692X_BRT_MSB, brt_val);
if (ret) {
- dev_err(&led->client->dev, "Cannot write MSB\n");
+ dev_err(&led->client->dev, "Cannot write MSB: %d\n", ret);
goto out;
}

ret = regmap_write(led->regmap, LM3692X_BRT_LSB, led_brightness_lsb);
if (ret) {
- dev_err(&led->client->dev, "Cannot write LSB\n");
+ dev_err(&led->client->dev, "Cannot write LSB: %d\n", ret);
goto out;
}
out:
@@ -203,7 +204,7 @@ static int lm3692x_init(struct lm3692x_led *led)
ret = regulator_enable(led->regulator);
if (ret) {
dev_err(&led->client->dev,
- "Failed to enable regulator\n");
+ "Failed to enable regulator: %d\n", ret);
return ret;
}
}
@@ -213,7 +214,8 @@ static int lm3692x_init(struct lm3692x_led *led)

ret = lm3692x_fault_check(led);
if (ret) {
- dev_err(&led->client->dev, "Cannot read/clear faults\n");
+ dev_err(&led->client->dev, "Cannot read/clear faults: %d\n",
+ ret);
goto out;
}

@@ -409,7 +411,8 @@ static int lm3692x_remove(struct i2c_client *client)

ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_DEVICE_EN, 0);
if (ret) {
- dev_err(&led->client->dev, "Failed to disable regulator\n");
+ dev_err(&led->client->dev, "Failed to disable regulator: %d\n",
+ ret);
return ret;
}

@@ -420,7 +423,7 @@ static int lm3692x_remove(struct i2c_client *client)
ret = regulator_disable(led->regulator);
if (ret)
dev_err(&led->client->dev,
- "Failed to disable regulator\n");
+ "Failed to disable regulator: %d\n", ret);
}

mutex_destroy(&led->lock);
--
2.23.0.rc1
\
 
 \ /
  Last update: 2019-09-22 12:25    [W:0.080 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site