lkml.org 
[lkml]   [2019]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC 0/5] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
Date
This patch set converts the opp tables to opp-v2 format
and extends the ti-cpufreq to support omap3.

It adds 720 MHz (omap34xx) and 1 GHz (omap36xx) OPPs but
tells the ti-cpufreq driver to disable them if the speed
binned / 720MHz grade eFuse bits indicate that the chip
is not rated for that speed.

It has been tested (for chip variant detection, not reliability
of high speed OPPs) on:
* BeagleBoard C2 (omap3430 600MHz)
* BeagleBoard XM B (dm3730 800MHz)
* GTA04A4 (dm3730 800MHz)
* GTA04A5 (dm3730 1GHz)


H. Nikolaus Schaller (5):
cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
ARM: dts: add support for opp-v2 for omap34xx and omap36xx
ARM: dts: omap3-evm-37xx: fix compatible from omap3630 to omap36xx
ARM: dts: omap3-n950-n9: remove opp-v1 table
ARM: dts: omap3-beagle: make explicitly compatible to ti,omap34xx

arch/arm/boot/dts/omap3-beagle.dts | 2 +-
arch/arm/boot/dts/omap3-evm-37xx.dts | 2 +-
arch/arm/boot/dts/omap3-n950-n9.dtsi | 7 ---
arch/arm/boot/dts/omap34xx.dtsi | 59 ++++++++++++++++---
arch/arm/boot/dts/omap36xx.dtsi | 47 ++++++++++++---
drivers/cpufreq/cpufreq-dt-platdev.c | 2 +-
drivers/cpufreq/ti-cpufreq.c | 86 +++++++++++++++++++++++++++-
7 files changed, 176 insertions(+), 29 deletions(-)

--
2.19.1

\
 
 \ /
  Last update: 2019-09-02 12:56    [W:0.091 / U:67.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site