lkml.org 
[lkml]   [2019]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 8/8] iommu/arm-smmu-v3: Add support for PCI PASID
On Mon, Jul 08, 2019 at 09:58:16AM +0200, Auger Eric wrote:
> > + ret = pci_enable_pasid(pdev, features);
> > + if (!ret)
> > + master->ssid_bits = min_t(u8, ilog2(num_pasids),
> > + master->smmu->ssid_bits);
> I don't really get why this setting is conditional to the success of
> pci_enabled_pasid and not num_pasids > 0.

num_pasids only contains the value of the PCIe PASID capability. If
pci_enable_pasid() fails then we want to leave master->ssid_bits to 0 so
that we report to users that SVA and AUXD aren't supported.

> If it fails the ssid_bits is set to min(smmu->ssid_bits,
> fwspec->num_pasid_bits) anyway.
>
> > + return ret;
> > +}
> > +
> > +static void arm_smmu_disable_pasid(struct arm_smmu_master *master)
> > +{
> > + struct pci_dev *pdev;
> > +
> > + if (!dev_is_pci(master->dev))
> > + return;
> > +
> > + pdev = to_pci_dev(master->dev);
> > +
> > + if (!pdev->pasid_enabled)
> > + return;
> > +
> > + pci_disable_pasid(pdev);
> > + master->ssid_bits = 0;
> in case of a platform device you leave the ssid_bits to a value != 0. Is
> that what you want?

Yes, this is only for PCI devices, there is no standard way of disabling
PASID in platform devices. We just take whatever the firmware gives us.

> > +}
> > +
> > static void arm_smmu_detach_dev(struct arm_smmu_master *master)
> > {
> > unsigned long flags;
> > @@ -2413,6 +2456,9 @@ static int arm_smmu_add_device(struct device *dev)
> >
> > master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
> >
> > + /* Note that PASID must be enabled before, and disabled after ATS */
> > + arm_smmu_enable_pasid(master);
> In case the call fails, don't you want to handle the error and reset the
> ssid_bits?

This function fails if the device doesn't support PASID, and we leave
ssid_bits to 0. That said, I think it would be nicer to move the above
line (that deals with fwspec) into arm_smmu_enable_pasid()

Thanks,
Jean

\
 
 \ /
  Last update: 2019-09-19 17:11    [W:0.042 / U:20.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site