lkml.org 
[lkml]   [2019]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/3] phy: qcom-qmp: Add SM8150 QMP UFS PHY support
From
Date
On 06/09/2019 07:10, Vinod Koul wrote:

> SM8150 UFS PHY is v4 of QMP phy. Add support for V4 QMP phy register
> defines and support for SM8150 QMP UFS PHY.
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 125 ++++++++++++++++++++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp.h | 96 +++++++++++++++++++++
> 2 files changed, 221 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 34ff6434da8f..92d3048f2b36 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -164,6 +164,11 @@ static const unsigned int sdm845_ufsphy_regs_layout[] = {
> [QPHY_PCS_READY_STATUS] = 0x160,
> };
>
> +static const unsigned int sm8150_ufsphy_regs_layout[] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x180,
> +};
> +
> static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
> QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
> QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> @@ -878,6 +883,93 @@ static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> };
>
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_SYSCLK_EN_SEL, 0xd9),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_HSCLK_HS_SWITCH_SEL, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_LOCK_CMP_EN, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_VCO_TUNE_MAP, 0x02),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_PLL_IVCO, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_VCO_TUNE_INITVAL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_BIN_VCOCAL_HSCLK_SEL, 0x11),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_DEC_START_MODE0, 0x82),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_CP_CTRL_MODE0, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_PLL_RCTRL_MODE0, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_PLL_CCTRL_MODE0, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_LOCK_CMP1_MODE0, 0xff),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_LOCK_CMP2_MODE0, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_DEC_START_MODE1, 0x98),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_CP_CTRL_MODE1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_PLL_RCTRL_MODE1, 0x16),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_PLL_CCTRL_MODE1, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_LOCK_CMP1_MODE1, 0x32),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_LOCK_CMP2_MODE1, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
> +
> + /* Rate B */
> + QMP_PHY_INIT_CFG(QSERDES_COM_V4_VCO_TUNE_MAP, 0x06),

IMO, the name of the symbolic constants should be QSERDES_V4_COM*
(like below for QSERDES_V4_TX* and QSERDES_V4_RX*)


> +static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
> + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
> +
> +};
> +
> +static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_V4_RX_SIGDET_CTRL2, 0x6d),
> + QMP_PHY_INIT_CFG(QPHY_V4_TX_LARGE_AMP_DRV_LVL, 0x0a),
> + QMP_PHY_INIT_CFG(QPHY_V4_TX_SMALL_AMP_DRV_LVL, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V4_TX_MID_TERM_CTRL1, 0x43),
> + QMP_PHY_INIT_CFG(QPHY_V4_DEBUG_BUS_CLKSEL, 0x1f),
> + QMP_PHY_INIT_CFG(QPHY_V4_RX_MIN_HIBERN8_TIME, 0xff),
> + QMP_PHY_INIT_CFG(QPHY_V4_MULTI_LANE_CTRL1, 0x02),
> +};
>
> /* struct qmp_phy_cfg - per-PHY initialization config */
> struct qmp_phy_cfg {
> @@ -1038,6 +1130,10 @@ static const char * const sdm845_ufs_phy_clk_l[] = {
> "ref", "ref_aux",
> };
>
> +static const char * const sm8150_ufs_phy_clk_l[] = {
> + "ref", "ref_aux",
> +};
> +

Why not just reuse sdm845_ufs_phy_clk_l?

> /* list of resets */
> static const char * const msm8996_pciephy_reset_l[] = {
> "phy", "common", "cfg",
> @@ -1284,6 +1380,32 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> .is_dual_lane_phy = true,
> };
>
> +static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> + .type = PHY_TYPE_UFS,
> + .nlanes = 2,
> +
> + .serdes_tbl = sm8150_ufsphy_serdes_tbl,
> + .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
> + .tx_tbl = sm8150_ufsphy_tx_tbl,
> + .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
> + .rx_tbl = sm8150_ufsphy_rx_tbl,
> + .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
> + .pcs_tbl = sm8150_ufsphy_pcs_tbl,
> + .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
> + .clk_list = sm8150_ufs_phy_clk_l,
> + .num_clks = ARRAY_SIZE(sm8150_ufs_phy_clk_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = sm8150_ufsphy_regs_layout,
> +
> + .start_ctrl = SERDES_START,
> + .pwrdn_ctrl = SW_PWRDN,
> + .mask_pcs_ready = PCS_READY,

I think you need to rework your patch on top of
"phy: qcom-qmp: Correct ready status, again"
(it removed this field)

\
 
 \ /
  Last update: 2019-09-18 17:09    [W:0.088 / U:6.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site