lkml.org 
[lkml]   [2019]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/6] media: sun4i: Add H3 deinterlace driver
Hi,

On Sat, Sep 14, 2019 at 08:42:22AM +0200, Jernej Škrabec wrote:
> Dne četrtek, 12. september 2019 ob 22:26:47 CEST je Maxime Ripard napisal(a):
> > Hi,
> >
> > On Thu, Sep 12, 2019 at 07:51:31PM +0200, Jernej Skrabec wrote:
> > > + dev->regmap = devm_regmap_init_mmio(dev->dev, dev->base,
> > > +
> &deinterlace_regmap_config);
> > > + if (IS_ERR(dev->regmap)) {
> > > + dev_err(dev->dev, "Couldn't create deinterlace
> regmap\n");
> > > +
> > > + return PTR_ERR(dev->regmap);
> > > + }
> > > +
> > > + ret = clk_prepare_enable(dev->bus_clk);
> > > + if (ret) {
> > > + dev_err(dev->dev, "Failed to enable bus clock\n");
> > > +
> > > + return ret;
> > > + }
> >
> > Do you need to keep the bus clock enabled all the time? Usually, for
> > the SoCs that have a reset line, you only need it to read / write to
> > the registers, not to have the controller actually running.
> >
> > If you don't, then regmap_init_mmio_clk will take care of that for
> > you.
> >
> > > + clk_set_rate(dev->mod_clk, 300000000);
> > > +
> > > + ret = clk_prepare_enable(dev->mod_clk);
> > > + if (ret) {
> > > + dev_err(dev->dev, "Failed to enable mod clock\n");
> > > +
> > > + goto err_bus_clk;
> > > + }
> > > +
> > > + ret = clk_prepare_enable(dev->ram_clk);
> > > + if (ret) {
> > > + dev_err(dev->dev, "Failed to enable ram clock\n");
> > > +
> > > + goto err_mod_clk;
> > > + }
> > > +
> > > + ret = reset_control_reset(dev->rstc);
> > > + if (ret) {
> > > + dev_err(dev->dev, "Failed to apply reset\n");
> > > +
> > > + goto err_ram_clk;
> > > + }
> >
> > This could be moved to a runtime_pm hook, with get_sync called in the
> > open. That way you won't leave the device powered on if it's unused.
>
> Currently I'm looking at sun4i_csi.c as an example of runtime ops, but it
> seems a bit wrong to have suspend and resume function marked with
> __maybe_unused because they are the only functions which enable needed clocks.
> If CONFIG_PM is not enabled, then this driver simply won't work, because
> clocks will never get enabled. I guess I can implement runtime pm ops in the
> same way and add additional handling when CONFIG_PM is not enabled, right?

Ah, right. I guess you can either add a depends on PM, or you can call
the function directly and use set_active like we're doing in the SPI
driver.

> BTW, which callback is get_sync? I don't see it in dev_pm_ops. I suppose I
> need only runtime_suspend and runtime_resume.

get_sync is the user facing API, ie what you call when you want the
device to be powered up. This will call runtime_resume if needed
(there were no users, and you become the first one), and on the parent
devices if needed too (even though it's not our case).

> Off topic: sun6i_csi.c includes linux/pm_runtime.h but it doesn't have any kind
> of power management as far as I can see.

That's probably something we can remove then

Thanks!
Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-09-18 16:30    [W:0.039 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site