lkml.org 
[lkml]   [2019]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/7] usb: mtu3: support ip-sleep wakeup for MT8183
From
Date
On Wed, 2019-09-11 at 11:44 -0700, Guenter Roeck wrote:
> On Fri, Aug 30, 2019 at 03:40:50PM +0800, Chunfeng Yun wrote:
> > Support USB wakeup by ip-sleep mode for MT8183, it's similar to
> > MT8173
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v3: changes micros define
> >
> > v2: no changes
> > ---
> > drivers/usb/mtu3/mtu3_host.c | 14 +++++++++++++-
> > 1 file changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
> > index c871b94f3e6f..4f8208885ebd 100644
> > --- a/drivers/usb/mtu3/mtu3_host.c
> > +++ b/drivers/usb/mtu3/mtu3_host.c
> > @@ -18,6 +18,12 @@
> > #include "mtu3.h"
> > #include "mtu3_dr.h"
> >
> > +/* mt8183 etc */
> > +#define PERI_WK_CTRL0 0x20
> > +#define WC0_IS_C(x) (((x) & 0xf) << 28) /* cycle debounce */
> > +#define WC0_IS_P BIT(12) /* polarity */
> > +#define WC0_IS_EN BIT(6)
> > +
>
> For 64-bit builds, this results in:
>
> drivers/usb/mtu3/mtu3_host.c: In function ‘ssusb_wakeup_ip_sleep_set’:
> ./include/linux/bits.h:6:19: warning:
> conversion from ‘long unsigned int’ to ‘u32’ {aka ‘unsigned int’}
> changes value from ‘18446744073441120320’ to ‘4026536000’ [-Woverflow]
>
> since WC0_IS_C() is sign extended to 64 bit and then truncated.
Got it, thanks a lot

>
> Observed with gcc 7.4.0 and 8.3.0.
>
> Guenter
>
> > /* mt8173 etc */
> > #define PERI_WK_CTRL1 0x4
> > #define WC1_IS_C(x) (((x) & 0xf) << 26) /* cycle debounce */
> > @@ -30,7 +36,8 @@
> > #define SSC_SPM_INT_EN BIT(1)
> >
> > enum ssusb_uwk_vers {
> > - SSUSB_UWK_V1 = 1,
> > + SSUSB_UWK_V0 = 0,
> > + SSUSB_UWK_V1,
> > SSUSB_UWK_V2,
> > };
> >
> > @@ -43,6 +50,11 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
> > u32 reg, msk, val;
> >
> > switch (ssusb->uwk_vers) {
> > + case SSUSB_UWK_V0:
> > + reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
> > + msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
> > + val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
> > + break;
> > case SSUSB_UWK_V1:
> > reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
> > msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;


\
 
 \ /
  Last update: 2019-09-16 07:46    [W:0.123 / U:0.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site