[lkml]   [2019]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ARM: dts: imx6dl: SolidRun: add phy node with 100Mb/s max-speed
On Sun, Sep 15, 2019 at 09:30:00AM +0300, Baruch Siach wrote:
> Hi Andrew,
> On Tue, Sep 10 2019, Andrew Lunn wrote:
> > On Tue, Sep 10, 2019 at 06:55:07PM +0300, tinywrkb wrote:
> >> Cubox-i Solo/DualLite carrier board has 100Mb/s magnetics while the
> >> Atheros AR8035 PHY on the MicroSoM v1.3 CPU module is a 1GbE PHY device.
> >>
> >> Since commit 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in
> >> genphy_read_status") ethernet is broken on Cubox-i Solo/DualLite devices.
> >
> > Hi Tinywrkb
> >
> > You emailed lots of people, but missed the PHY maintainers :-(
> >
> > Are you sure this is the patch which broken it? Did you do a git
> > bisect.
> Tinywrkb confirmed to me in private communication that revert of
> 5502b218e001 fixes Ethernet for him on effected system.
> He also referred me to an old Cubox-i spec that lists 10/100 Ethernet
> only for i.MX6 Solo/DualLite variants of Cubox-i. It turns out that
> there was a plan to use a different 10/100 PHY for Solo/DualLite
> SOMs. This plan never materialized. All SolidRun i.MX6 SOMs use the same
> AR8035 PHY that supports 1Gb.
> Commit 5502b218e001 might be triggering a hardware issue on the affected
> Cubox-i. I could not reproduce the issue here with Cubox-i and a Dual
> SOM variant running v5.3-rc8. I have no Solo/DualLite variant handy at
> the moment.

With 5.3 due out today, I'll be updating my systems to that, which will
include quite a few variants of the Hummingboard.

It looks like one of my Solo Hummingboards (running a fully up to date
Fedora 28) has encountered a problem, so needs a reboot...

systemd-journald[436]: Failed to retrieve credentials for PID 17906, ignoring: Cannot allocate memory
systemd-journald[436]: Failed to open runtime journal: Cannot allocate memory

# ps aux
root 436 0.0 5.2 3128140 26392 ? Ss Aug03 1:20 /usr/lib/systemd/systemd-journald
# uptime
13:28:41 up 42 days, 19:13, 1 user, load average: 0.00, 0.03, 0.00

Looks like systemd-journald has a rather bad memory leak...

#include <std-complaints-about-systemd>

RMK's Patch system:
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to 11.9Mbps down 500kbps up

 \ /
  Last update: 2019-09-15 14:30    [W:0.203 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site