[lkml]   [2019]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 3/3] spi: dw: Add compatible string for Renesas RZ/N1 SPI Controller
On Fri, Sep 13, 2019 at 3:14 PM Gareth Williams
<> wrote:
> From: Phil Edworthy <>
> The Renesas RZ/N1 SPI Controller is based on the Synopsys DW SSI, but has
> additional registers for software CS control and DMA. This patch does not
> address the changes required for DMA support, it simply adds the compatible
> string. The CS registers are not needed as Linux can use gpios for the CS
> signals.

> + { .compatible = "renesas,rzn1-spi", },

Can't you simple use in DT something like
compatible = "renesas,rzn1-spi", "snps,dw-apb-ssi"

With Best Regards,
Andy Shevchenko

 \ /
  Last update: 2019-09-15 13:01    [W:0.109 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site