lkml.org 
[lkml]   [2019]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] staging: iio: accel: adis16240: move out of staging
On Thu, 12 Sep 2019 16:59:10 +0300
Alexandru Ardelean <ardeleanalex@gmail.com> wrote:

> On Wed, Sep 11, 2019 at 7:21 PM Rodrigo Carvalho <rodrigorsdc@gmail.com> wrote:
> >
> > Hi,
> >
> > Em seg, 9 de set de 2019 às 02:53, Ardelean, Alexandru
> > <alexandru.Ardelean@analog.com> escreveu:
> > >
> > > On Sun, 2019-09-08 at 12:09 +0100, Jonathan Cameron wrote:
> > > > On Mon, 2 Sep 2019 13:26:02 +0000
> > > > "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote:
> > > >
> > > > > On Sun, 2019-09-01 at 21:59 -0300, Rodrigo Carvalho wrote:
> > > > > > Move ADIS16240 driver from staging to mainline.
> > > > > >
> > > > > > The ADIS16240 is a fully integrated digital shock detection
> > > > > > and recorder system.
> > > > >
> > > > > Hey,
> > > > >
> > > > > Comments inline.
> > > > >
> > > > > I'll probably take a look in the next days again.
> > > > > There seem to be some ABI/sysfs attributes that need to be resolved before moving this out of staging.
> > > >
> > > > Absolutely. It is a 'new' type of device so there are definitely some
> > > > corners that need discussing before we move out of staging and commit
> > > > to maintaining the ABI moving forwards.
> > > >
> > > > That is the real reason this driver was still in staging! No one
> > > > had been through the process of proposing the ABI and responding to
> > > > questions etc.
> > > >
> > > > The issue with impact sensors has always been that they don't really fit
> > > > our normal model for buffers or triggers.
> > > >
> > > > So normally a trigger (if exposed in IIO) is used as one trigger
> > > > causes 1 set of samples (so like a frame trigger for a camera).
> > > >
> > > > These devices tend to work in a mode where one trigger causes data
> > > > to be captured for a period of time. In this part that's the event
> > > > recorder function
> > > >
> > > > No one is realistically going to buy an impact sensor to just use it
> > > > as an accelerometer which is what this driver is currently doing.
> > > > I suppose we could just leave support in that form for now, but
> > > > I'm no sure how much use it is to anyone.
> > > >
> > > > Analog Devices people, worth working out how to support the event
> > > > recorder? For that someone needs to have hardware as it is complex
> > > > to say the least!
> > >
> > > Worth it: yes.
> > > But we don't have any resources to allocate for this [at this point in time].
> > >
> > > >
> > > > We could move it out but might be worth adding a comment somewhere
> > > > saying this only really supports direct access to channels, and
> > > > not the event recorder functionality.
> > > >
> > >
> > > I guess, I would vote for leaving it in staging.
> > > It's also a way to mark it as a work-in-progress/not-done/still-needs-something kind of thing.
> > > If we move it now, it gets the status of "everything-resolved" which is not yet the case.
> > >
> > > Thanks for the insight/background info.
> > > Much of it was discussed before my time.
> >
> > How about adis16203? Is it more simple to move this driver out of staging?
>
> Replying from my personal email, as I seem to have my periodical
> issues with the work-email.
>
> At first glance I can't see any obvious blockers for this.
>
> I think Jonathan may need to provide some feedback here.

There is a 'fixme' in the channels which I suspect is the remaining blocker
on this one. The current y axis is actually just a different representation
of the value on the x axis. I 'think' the only reason to support both
of these is the interaction with the threshold detectors. Those
are rather simple, so if you have -10 on the second channel which is 350 on the
first, it would detected as < 10 on the second but not the first.
It is ugly, but we may be better just treating these as two separate channels
on the same axis - similar to the way we would deal with the case of two
accelerometers in a package, with different ranges.

Also a rather odd bit of abstraction around _addresses given there
is only one specified.

Might be nice to clean out some of the less useful comments for registers
where the register name makes it clear what they are. It's a mixture of
some useful ones and some pointless ones at the moment.

So a few bits to tidy up and may more come up in a thorough review.

Thanks,

Jonathan

>
> Thanks
> Alex
>
> >
> > > >
> > > > Jonathan
> > >
> > > Alex
> > >
> > > >
> > > >
> > > > > > Signed-off-by: Rodrigo Ribeiro Carvalho <rodrigorsdc@gmail.com>
> > > > > > ---
> > > > > > drivers/iio/accel/Kconfig | 12 +
> > > > > > drivers/iio/accel/Makefile | 1 +
> > > > > > drivers/iio/accel/adis16240.c | 454 ++++++++++++++++++++++++++
> > > > > > drivers/staging/iio/accel/Kconfig | 12 -
> > > > > > drivers/staging/iio/accel/Makefile | 1 -
> > > > > > drivers/staging/iio/accel/adis16240.c | 454 --------------------------
> > > > > > 6 files changed, 467 insertions(+), 467 deletions(-)
> > > > > > create mode 100644 drivers/iio/accel/adis16240.c
> > > > > > delete mode 100644 drivers/staging/iio/accel/adis16240.c
> > > > >
> > > > > Looks like MAINTAINERS file also needs to be updated, also with the DT bindings file.
> > > > > I think checkpatch usually complains about these.
> > > > >
> > > > > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> > > > > > index d4ef35aeb579..91fd8741c95f 100644
> > > > > > --- a/drivers/iio/accel/Kconfig
> > > > > > +++ b/drivers/iio/accel/Kconfig
> > > > > > @@ -30,6 +30,18 @@ config ADIS16209
> > > > > > To compile this driver as a module, say M here: the module will be
> > > > > > called adis16209.
> > > > > >
> > > > > > +config ADIS16240
> > > > > > + tristate "Analog Devices ADIS16240 Programmable Impact Sensor and Recorder"
> > > > > > + depends on SPI
> > > > > > + select IIO_ADIS_LIB
> > > > > > + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
> > > > > > + help
> > > > > > + Say Y here to build support for Analog Devices adis16240 programmable
> > > > > > + impact Sensor and recorder.
> > > > > > +
> > > > > > + To compile this driver as a module, say M here: the module will be
> > > > > > + called adis16240.
> > > > > > +
> > > > > > config ADXL345
> > > > > > tristate
> > > > > >
> > > > > > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> > > > > > index 56bd0215e0d4..f7e025a86dd9 100644
> > > > > > --- a/drivers/iio/accel/Makefile
> > > > > > +++ b/drivers/iio/accel/Makefile
> > > > > > @@ -6,6 +6,7 @@
> > > > > > # When adding new entries keep the list in alphabetical order
> > > > > > obj-$(CONFIG_ADIS16201) += adis16201.o
> > > > > > obj-$(CONFIG_ADIS16209) += adis16209.o
> > > > > > +obj-$(CONFIG_ADIS16240) += adis16240.o
> > > > > > obj-$(CONFIG_ADXL345) += adxl345_core.o
> > > > > > obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
> > > > > > obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
> > > > > > diff --git a/drivers/iio/accel/adis16240.c b/drivers/iio/accel/adis16240.c
> > > > > > new file mode 100644
> > > > > > index 000000000000..82099db4bf0c
> > > > > > --- /dev/null
> > > > > > +++ b/drivers/iio/accel/adis16240.c
> > > > > > @@ -0,0 +1,454 @@
> > > > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > > > +/*
> > > > > > + * ADIS16240 Programmable Impact Sensor and Recorder driver
> > > > > > + *
> > > > > > + * Copyright 2010 Analog Devices Inc.
> > > > > > + */
> > > > > > +
> > > > > > +#include <linux/interrupt.h>
> > > > > > +#include <linux/irq.h>
> > > > > > +#include <linux/gpio.h>
> > > > > > +#include <linux/delay.h>
> > > > > > +#include <linux/device.h>
> > > > > > +#include <linux/kernel.h>
> > > > > > +#include <linux/spi/spi.h>
> > > > > > +#include <linux/slab.h>
> > > > > > +#include <linux/sysfs.h>
> > > > > > +#include <linux/list.h>
> > > > > > +#include <linux/module.h>
> > > > > > +
> > > > > > +#include <linux/iio/iio.h>
> > > > > > +#include <linux/iio/sysfs.h>
> > > > > > +#include <linux/iio/buffer.h>
> > > > > > +#include <linux/iio/imu/adis.h>
> > > > > > +
> > > > > > +#define ADIS16240_STARTUP_DELAY 220 /* ms */
> > > > > > +
> > > > > > +/* Flash memory write count */
> > > > > > +#define ADIS16240_FLASH_CNT 0x00
> > > > > > +
> > > > > > +/* Output, power supply */
> > > > > > +#define ADIS16240_SUPPLY_OUT 0x02
> > > > > > +
> > > > > > +/* Output, x-axis accelerometer */
> > > > > > +#define ADIS16240_XACCL_OUT 0x04
> > > > > > +
> > > > > > +/* Output, y-axis accelerometer */
> > > > > > +#define ADIS16240_YACCL_OUT 0x06
> > > > > > +
> > > > > > +/* Output, z-axis accelerometer */
> > > > > > +#define ADIS16240_ZACCL_OUT 0x08
> > > > > > +
> > > > > > +/* Output, auxiliary ADC input */
> > > > > > +#define ADIS16240_AUX_ADC 0x0A
> > > > > > +
> > > > > > +/* Output, temperature */
> > > > > > +#define ADIS16240_TEMP_OUT 0x0C
> > > > > > +
> > > > > > +/* Output, x-axis acceleration peak */
> > > > > > +#define ADIS16240_XPEAK_OUT 0x0E
> > > > > > +
> > > > > > +/* Output, y-axis acceleration peak */
> > > > > > +#define ADIS16240_YPEAK_OUT 0x10
> > > > > > +
> > > > > > +/* Output, z-axis acceleration peak */
> > > > > > +#define ADIS16240_ZPEAK_OUT 0x12
> > > > > > +
> > > > > > +/* Output, sum-of-squares acceleration peak */
> > > > > > +#define ADIS16240_XYZPEAK_OUT 0x14
> > > > > > +
> > > > > > +/* Output, Capture Buffer 1, X and Y acceleration */
> > > > > > +#define ADIS16240_CAPT_BUF1 0x16
> > > > > > +
> > > > > > +/* Output, Capture Buffer 2, Z acceleration */
> > > > > > +#define ADIS16240_CAPT_BUF2 0x18
> > > > > > +
> > > > > > +/* Diagnostic, error flags */
> > > > > > +#define ADIS16240_DIAG_STAT 0x1A
> > > > > > +This looks like it could be converted to IIO_CHAN_INFO_SAMP_FREQ attribute.
> > > > > > +/* Diagnostic, event counter */
> > > > > > +#define ADIS16240_EVNT_CNTR 0x1C
> > > > > > +
> > > > > > +/* Diagnostic, check sum value from firmware test */
> > > > > > +#define ADIS16240_CHK_SUM 0x1E
> > > > > > +
> > > > > > +/* Calibration, x-axis acceleration offset adjustment */
> > > > > > +#define ADIS16240_XACCL_OFF 0x20
> > > > > > +
> > > > > > +/* Calibration, y-axis acceleration offset adjustment */
> > > > > > +#define ADIS16240_YACCL_OFF 0x22
> > > > > > +
> > > > > > +/* Calibration, z-axis acceleration offset adjustment */
> > > > > > +#define ADIS16240_ZACCL_OFF 0x24
> > > > > > +This looks like it could be converted to IIO_CHAN_INFO_SAMP_FREQ attribute.
> > > > > > +/* Clock, hour and minute */
> > > > > > +#define ADIS16240_CLK_TIME 0x2E
> > > > > > +
> > > > > > +/* Clock, month and day */
> > > > > > +#define ADIS16240_CLK_DATE 0x30
> > > > > > +
> > > > > > +/* Clock, year */
> > > > > > +#define ADIS16240_CLK_YEAR 0x32
> > > > > > +
> > > > > > +/* Wake-up setting, hour and minute */
> > > > > > +#define ADIS16240_WAKE_TIME 0x34
> > > > > > +
> > > > > > +/* Wake-up setting, month and day */
> > > > > > +#define ADIS16240_WAKE_DATE 0x36
> > > > > > +
> > > > > > +/* Alarm 1 amplitude threshold */
> > > > > > +#define ADIS16240_ALM_MAG1 0x38
> > > > > > +
> > > > > > +/* Alarm 2 amplitude threshold */
> > > > > > +#define ADIS16240_ALM_MAG2 0x3A
> > > > > > +
> > > > > > +/* Alarm control */
> > > > > > +#define ADIS16240_ALM_CTRL 0x3C
> > > > > > +
> > > > > > +/* Capture, external trigger control */
> > > > > > +#define ADIS16240_XTRIG_CTRL 0x3E
> > > > > > +
> > > > > > +/* Capture, address pointer */
> > > > > > +#define ADIS16240_CAPT_PNTR 0x40
> > > > > > +
> > > > > > +/* Capture, configuration and control */
> > > > > > +#define ADIS16240_CAPT_CTRL 0x42
> > > > > > +
> > > > > > +/* General-purpose digital input/output control */
> > > > > > +#define ADIS16240_GPIO_CTRL 0x44
> > > > > > +
> > > > > > +/* Miscellaneous control */
> > > > > > +#define ADIS16240_MSC_CTRL 0x46
> > > > > > +
> > > > > > +/* Internal sample period (rate) control */
> > > > > > +#define ADIS16240_SMPL_PRD 0x48
> > > > > > +
> > > > > > +/* System command */
> > > > > > +#define ADIS16240_GLOB_CMD 0x4A
> > > > > > +
> > > > > > +/* MSC_CTRL */
> > > > > > +
> > > > > > +/* Enables sum-of-squares output (XYZPEAK_OUT) */
> > > > > > +#define ADIS16240_MSC_CTRL_XYZPEAK_OUT_EN BIT(15)
> > > > > > +
> > > > > > +/* Enables peak tracking output (XPEAK_OUT, YPEAK_OUT, and ZPEAK_OUT) */
> > > > > > +#define ADIS16240_MSC_CTRL_X_Y_ZPEAK_OUT_EN BIT(14)
> > > > > > +
> > > > > > +/* Self-test enable: 1 = apply electrostatic force, 0 = disabled */
> > > > > > +#define ADIS16240_MSC_CTRL_SELF_TEST_EN BIT(8)
> > > > > > +
> > > > > > +/* Data-ready enable: 1 = enabled, 0 = disabled */
> > > > > > +#define ADIS16240_MSC_CTRL_DATA_RDY_EN BIT(2)
> > > > > > +
> > > > > > +/* Data-ready polarity: 1 = active high, 0 = active low */
> > > > > > +#define ADIS16240_MSC_CTRL_ACTIVE_HIGH BIT(1)
> > > > > > +
> > > > > > +/* Data-ready line selection: 1 = DIO2, 0 = DIO1 */
> > > > > > +#define ADIS16240_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
> > > > > > +
> > > > > > +/* DIAG_STAT */
> > > > > > +
> > > > > > +/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
> > > > > > +#define ADIS16240_DIAG_STAT_ALARM2 BIT(9)
> > > > > > +
> > > > > > +/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
> > > > > > +#define ADIS16240_DIAG_STAT_ALARM1 BIT(8)
> > > > > > +
> > > > > > +/* Capture buffer full: 1 = capture buffer is full */
> > > > > > +#define ADIS16240_DIAG_STAT_CPT_BUF_FUL BIT(7)
> > > > > > +
> > > > > > +/* Flash test, checksum flag: 1 = mismatch, 0 = match */
> > > > > > +#define ADIS16240_DIAG_STAT_CHKSUM BIT(6)
> > > > > > +
> > > > > > +/* Power-on, self-test flag: 1 = failure, 0 = pass */
> > > > > > +#define ADIS16240_DIAG_STAT_PWRON_FAIL_BIT 5
> > > > > > +
> > > > > > +/* Power-on self-test: 1 = in-progress, 0 = complete */
> > > > > > +#define ADIS16240_DIAG_STAT_PWRON_BUSY BIT(4)
> > > > > > +
> > > > > > +/* SPI communications failure */
> > > > > > +#define ADIS16240_DIAG_STAT_SPI_FAIL_BIT 3
> > > > > > +
> > > > > > +/* Flash update failure */
> > > > > > +#define ADIS16240_DIAG_STAT_FLASH_UPT_BIT 2
> > > > > > +
> > > > > > +/* Power supply above 3.625 V */
> > > > > > +#define ADIS16240_DIAG_STAT_POWER_HIGH_BIT 1
> > > > > > +
> > > > > > + /* Power supply below 2.225 V */
> > > > > > +#define ADIS16240_DIAG_STAT_POWER_LOW_BIT 0
> > > > > > +
> > > > > > +/* GLOB_CMD */
> > > > > > +
> > > > > > +#define ADIS16240_GLOB_CMD_RESUME BIT(8)
> > > > > > +#define ADIS16240_GLOB_CMD_SW_RESET BIT(7)
> > > > > > +#define ADIS16240_GLOB_CMD_STANDBY BIT(2)
> > > > > > +
> > > > > > +#define ADIS16240_ERROR_ACTIVE BIT(14)
> > > > > > +
> > > > > > +/* At the moment triggers are only used for ring buffer
> > > > > > + * filling. This may change!
> > > > > > + */
> > > > > > +
> > > > > > +enum adis16240_scan {
> > > > > > + ADIS16240_SCAN_ACC_X,
> > > > > > + ADIS16240_SCAN_ACC_Y,
> > > > > > + ADIS16240_SCAN_ACC_Z,
> > > > > > + ADIS16240_SCAN_SUPPLY,
> > > > > > + ADIS16240_SCAN_AUX_ADC,
> > > > > > + ADIS16240_SCAN_TEMP,
> > > > > > +};
> > > > > > +
> > > > > > +static ssize_t adis16240_spi_read_signed(struct device *dev,
> > > > > > + struct device_attribute *attr,
> > > > > > + char *buf,
> > > > > > + unsigned int bits)
> > > > > > +{
> > > > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> > > > > > + struct adis *st = iio_priv(indio_dev);
> > > > > > + int ret;
> > > > > > + s16 val = 0;
> > > > > > + unsigned int shift = 16 - bits;
> > > > > > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> > > > > > +
> > > > > > + ret = adis_read_reg_16(st,
> > > > > > + this_attr->address, (u16 *)&val);
> > > >
> > > > Check for odd line breaks. That looks like it'll fit under 80 chars
> > > > just fine.
> > > >
> > > > > > + if (ret)
> > > > > > + return ret;
> > > > > > +
> > > > > > + if (val & ADIS16240_ERROR_ACTIVE)
> > > > > > + adis_check_status(st);
> > > > > > +
> > > > > > + val = (s16)(val << shift) >> shift;
> > > >
> > > > Use sign_extend32 (added after this driver I think!)
> > > >
> > > > > > + return sprintf(buf, "%d\n", val);
> > > > > > +}
> > > > > > +
> > > > > > +static ssize_t adis16240_read_12bit_signed(struct device *dev,
> > > > > > + struct device_attribute *attr,
> > > > > > + char *buf)
> > > > > > +{
> > > > > > + return adis16240_spi_read_signed(dev, attr, buf, 12);
> > > > > > +}
> > > > > > +
> > > > > > +static IIO_DEVICE_ATTR(in_accel_xyz_squared_peak_raw, 0444,
> > > > > > + adis16240_read_12bit_signed, NULL,
> > > > > > + ADIS16240_XYZPEAK_OUT);
> > > > > > +
> > > > > > +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("4096");
> > > > > > +
> > > > > > +static const u8 adis16240_addresses[][2] = {
> > > > > > + [ADIS16240_SCAN_ACC_X] = { ADIS16240_XACCL_OFF, ADIS16240_XPEAK_OUT },
> > > > > > + [ADIS16240_SCAN_ACC_Y] = { ADIS16240_YACCL_OFF, ADIS16240_YPEAK_OUT },
> > > > > > + [ADIS16240_SCAN_ACC_Z] = { ADIS16240_ZACCL_OFF, ADIS16240_ZPEAK_OUT },
> > > > > > +};
> > > > > > +
> > > > > > +static int adis16240_read_raw(struct iio_dev *indio_dev,
> > > > > > + struct iio_chan_spec const *chan,
> > > > > > + int *val, int *val2,
> > > > > > + long mask)
> > > > > > +{
> > > > > > + struct adis *st = iio_priv(indio_dev);
> > > > > > + int ret;
> > > > > > + u8 addr;
> > > > > > + s16 val16;
> > > > > > +
> > > > > > + switch (mask) {
> > > > > > + case IIO_CHAN_INFO_RAW:
> > > > > > + return adis_single_conversion(indio_dev, chan,
> > > > > > + ADIS16240_ERROR_ACTIVE, val);
> > > > > > + case IIO_CHAN_INFO_SCALE:
> > > > > > + switch (chan->type) {
> > > > > > + case IIO_VOLTAGE:
> > > > > > + if (chan->channel == 0) {
> > > > > > + *val = 4;
> > > > > > + *val2 = 880000; /* 4.88 mV */
> > > > > > + return IIO_VAL_INT_PLUS_MICRO;
> > > > > > + }
> > > > > > + return -EINVAL;
> > > > > > + case IIO_TEMP:
> > > > > > + *val = 244; /* 0.244 C */
> > > > > > + *val2 = 0;
> > > > >
> > > > > This looks like a bug in the original driver.
> > > > > I think *val = 0, and *val2 = 244 ?
> >
> > I have doubt about this. Also in adis16203, adis16209 and
> > adis16201 decimal parts are in *val and not in *val2 on
> > IIO_TEMP. What do you think? If it is really a bug, I can send
> > a patch.
> >
> > > > > > + return IIO_VAL_INT_PLUS_MICRO;
> > > > > > + case IIO_ACCEL:
> > > > > > + *val = 0;
> > > > > > + *val2 = IIO_G_TO_M_S_2(51400); /* 51.4 mg */
> > > > > > + return IIO_VAL_INT_PLUS_MICRO;
> > > > > > + default:
> > > > > > + return -EINVAL;
> > > > > > + }
> > > > > > + break;
> > > > > > + case IIO_CHAN_INFO_PEAK_SCALE:
> > > > > > + *val = 0;
> > > > > > + *val2 = IIO_G_TO_M_S_2(51400); /* 51.4 mg */
> > > > > > + return IIO_VAL_INT_PLUS_MICRO;
> > > > > > + case IIO_CHAN_INFO_OFFSET:
> > > > > > + *val = 25000 / 244 - 0x133; /* 25 C = 0x133 */
> > > > > > + return IIO_VAL_INT;
> > > > > > + case IIO_CHAN_INFO_CALIBBIAS:
> > > > > > + addr = adis16240_addresses[chan->scan_index][0];
> > > > > > + ret = adis_read_reg_16(st, addr, &val16);
> > > > > > + if (ret)
> > > > > > + return ret;
> > > > > > + *val = sign_extend32(val16, 9);
> > > > > > + return IIO_VAL_INT;
> > > > > > + case IIO_CHAN_INFO_PEAK:
> > > > > > + addr = adis16240_addresses[chan->scan_index][1];
> > > > > > + ret = adis_read_reg_16(st, addr, &val16);
> > > > > > + if (ret)
> > > > > > + return ret;
> > > > > > + *val = sign_extend32(val16, 9);
> > > > > > + return IIO_VAL_INT;
> > > > > > + }
> > > > > > + return -EINVAL;
> > > > > > +}
> > > > > > +
> > > > > > +static int adis16240_write_raw(struct iio_dev *indio_dev,
> > > > > > + struct iio_chan_spec const *chan,
> > > > > > + int val,
> > > > > > + int val2,
> > > > > > + long mask)
> > > > > > +{
> > > > > > + struct adis *st = iio_priv(indio_dev);
> > > > > > + u8 addr;
> > > > > > +
> > > > > > + switch (mask) {
> > > > > > + case IIO_CHAN_INFO_CALIBBIAS:
> > > > > > + addr = adis16240_addresses[chan->scan_index][0];
> > > > > > + return adis_write_reg_16(st, addr, val & GENMASK(9, 0));
> > > > > > + }
> > > > > > + return -EINVAL;
> > > > > > +}
> > > > > > +
> > > > > > +static const struct iio_chan_spec adis16240_channels[] = {
> > > > > > + ADIS_SUPPLY_CHAN(ADIS16240_SUPPLY_OUT, ADIS16240_SCAN_SUPPLY, 0, 10),
> > > > > > + ADIS_AUX_ADC_CHAN(ADIS16240_AUX_ADC, ADIS16240_SCAN_AUX_ADC, 0, 10),
> > > > > > + ADIS_ACCEL_CHAN(X, ADIS16240_XACCL_OUT, ADIS16240_SCAN_ACC_X,
> > > > > > + BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK),
> > > > > > + 0, 10),
> > > > > > + ADIS_ACCEL_CHAN(Y, ADIS16240_YACCL_OUT, ADIS16240_SCAN_ACC_Y,
> > > > > > + BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK),
> > > > > > + 0, 10),
> > > > > > + ADIS_ACCEL_CHAN(Z, ADIS16240_ZACCL_OUT, ADIS16240_SCAN_ACC_Z,
> > > > > > + BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK),
> > > > > > + 0, 10),
> > > > > > + ADIS_TEMP_CHAN(ADIS16240_TEMP_OUT, ADIS16240_SCAN_TEMP, 0, 10),
> > > > > > + IIO_CHAN_SOFT_TIMESTAMP(6)
> > > > > > +};
> > > > > > +
> > > > > > +static struct attribute *adis16240_attributes[] = {
> > > > > > + &iio_dev_attr_in_accel_xyz_squared_peak_raw.dev_attr.attr,
> > > > >
> > > > > This one looks a bit weird/rare.
> > > > > I am not sure about it's use-case/need right now (at this point in time).
> > > > >
> > > > > Maybe we could just drop it?
> > > > > Since I did not write the initial driver, I don't know yet what it was supposed to be/do.
> > > >
> > > > For an impact sensor it's a fairly useful thing I suspect as it is giving the maximum
> > > > acceleration in any direction that occured (once you square root it in userspace.)
> > > >
> > > > > In any case, if we want to add it, it looks like it needs an ABI documentation.
> > > >
> > > > Agreed. Needs docs. We actually have a modifier for it so can be handled
> > > > as a channel. IIO_MOD_SUM_SQUARED_X_Y_Z :)
> > > >
> > > >
> > > > >
> > > > > > + &iio_const_attr_sampling_frequency_available.dev_attr.attr,
> > > > >
> > > > > This looks like it could be converted to IIO_CHAN_INFO_SAMP_FREQ attribute.
> > > > >
> > > > >
> > > > > > + NULL
> > > > > > +};
> > > > > > +
> > > > > > +static const struct attribute_group adis16240_attribute_group = {
> > > > > > + .attrs = adis16240_attributes,
> > > > > > +};
> > > > > > +
> > > > > > +static const struct iio_info adis16240_info = {
> > > > > > + .attrs = &adis16240_attribute_group,
> > > > > > + .read_raw = adis16240_read_raw,
> > > > > > + .write_raw = adis16240_write_raw,
> > > > > > + .update_scan_mode = adis_update_scan_mode,
> > > > > > +};
> > > > > > +
> > > > > > +static const char * const adis16240_status_error_msgs[] = {
> > > > > > + [ADIS16240_DIAG_STAT_PWRON_FAIL_BIT] = "Power on, self-test failed",
> > > > > > + [ADIS16240_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
> > > > > > + [ADIS16240_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
> > > > > > + [ADIS16240_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> > > > > > + [ADIS16240_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.225V",
> > > > > > +};
> > > > > > +
> > > > > > +static const struct adis_data adis16240_data = {
> > > > > > + .write_delay = 35,
> > > > > > + .read_delay = 35,
> > > > > > + .msc_ctrl_reg = ADIS16240_MSC_CTRL,
> > > > > > + .glob_cmd_reg = ADIS16240_GLOB_CMD,
> > > > > > + .diag_stat_reg = ADIS16240_DIAG_STAT,
> > > > > > +
> > > > > > + .self_test_mask = ADIS16240_MSC_CTRL_SELF_TEST_EN,
> > > > > > + .self_test_no_autoclear = true,
> > > > > > + .startup_delay = ADIS16240_STARTUP_DELAY,
> > > > > > +
> > > > > > + .status_error_msgs = adis16240_status_error_msgs,
> > > > > > + .status_error_mask = BIT(ADIS16240_DIAG_STAT_PWRON_FAIL_BIT) |
> > > > > > + BIT(ADIS16240_DIAG_STAT_SPI_FAIL_BIT) |
> > > > > > + BIT(ADIS16240_DIAG_STAT_FLASH_UPT_BIT) |
> > > > > > + BIT(ADIS16240_DIAG_STAT_POWER_HIGH_BIT) |
> > > > > > + BIT(ADIS16240_DIAG_STAT_POWER_LOW_BIT),
> > > > > > +};
> > > > > > +
> > > > > > +static int adis16240_probe(struct spi_device *spi)
> > > > > > +{
> > > > > > + int ret;
> > > > > > + struct adis *st;
> > > > > > + struct iio_dev *indio_dev;
> > > > > > +
> > > > > > + /* setup the industrialio driver allocated elements */
> > > >
> > > > I would review comments and decide whether they actually add anything.
> > > > This one for example - I'm not convinced!
> > > >
> > > > > > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> > > > > > + if (!indio_dev)
> > > > > > + return -ENOMEM;
> > > > > > + st = iio_priv(indio_dev);
> > > > > > + /* this is only used for removal purposes */
> > > > > > + spi_set_drvdata(spi, indio_dev);
> > > > > > +
> > > > > > + indio_dev->name = spi->dev.driver->name;
> > > > > > + indio_dev->dev.parent = &spi->dev;
> > > > > > + indio_dev->info = &adis16240_info;
> > > > > > + indio_dev->channels = adis16240_channels;
> > > > > > + indio_dev->num_channels = ARRAY_SIZE(adis16240_channels);
> > > > > > + indio_dev->modes = INDIO_DIRECT_MODE;
> > > > > > +
> > > > > > + ret = adis_init(st, indio_dev, spi, &adis16240_data);
> > > > > > + if (ret)
> > > > > > + return ret;
> > > >
> > > > Might be nice to look at adding some white space after error handling
> > > > blocks like this. A blank line in locations like this make it
> > > > easier for the eye to follow the code.
> > > >
> > > > > > + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
> > > > > > + if (ret)
> > > > > > + return ret;
> > > > > > +
> > > > > > + /* Get the device into a sane initial state */
> > > > > > + ret = adis_initial_startup(st);
> > > > > > + if (ret)
> > > > > > + goto error_cleanup_buffer_trigger;
> > > > > > + ret = iio_device_register(indio_dev);
> > > > > > + if (ret)
> > > > > > + goto error_cleanup_buffer_trigger;
> > > > > > + return 0;
> > > > > > +
> > > > > > +error_cleanup_buffer_trigger:
> > > > > > + adis_cleanup_buffer_and_trigger(st, indio_dev);
> > > > > > + return ret;
> > > > > > +}
> > > > > > +
> > > > > > +static int adis16240_remove(struct spi_device *spi)
> > > > > > +{
> > > > > > + struct iio_dev *indio_dev = spi_get_drvdata(spi);
> > > > > > + struct adis *st = iio_priv(indio_dev);
> > > > > > +
> > > > > > + iio_device_unregister(indio_dev);
> > > > > > + adis_cleanup_buffer_and_trigger(st, indio_dev);
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static const struct of_device_id adis16240_of_match[] = {
> > > > > > + { .compatible = "adi,adis16240" },
> > > > > > + { },
> > > > > > +};
> > > > > > +MODULE_DEVICE_TABLE(of, adis16240_of_match);
> > > > > > +
> > > > > > +static struct spi_driver adis16240_driver = {
> > > > > > + .driver = {
> > > > > > + .name = "adis16240",
> > > > > > + .of_match_table = adis16240_of_match,
> > > > > > + },
> > > > > > + .probe = adis16240_probe,
> > > > > > + .remove = adis16240_remove,
> > > > > > +};
> > > > > > +module_spi_driver(adis16240_driver);
> > > > > > +
> > > > > > +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
> > > > > > +MODULE_DESCRIPTION("Analog Devices Programmable Impact Sensor and Recorder");
> > > > > > +MODULE_LICENSE("GPL v2");
> > > > > > +MODULE_ALIAS("spi:adis16240");
> > > > ...
> >
> > Thanks,
> > Rodrigo

\
 
 \ /
  Last update: 2019-09-15 11:36    [W:0.094 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site