lkml.org 
[lkml]   [2019]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch 3/6] media: dt-bindings: ov2659: add powerdown-gpios optional property
Lad, Prabhakar <prabhakar.csengg@gmail.com> wrote on Sat [2019-Sep-14 11:11:02 +0100]:
> Hi Benoit,
>
> Thank you for the patch.
>
> On Thu, Sep 12, 2019 at 1:58 PM Benoit Parrot <bparrot@ti.com> wrote:
> >
> > Add powerdown-gpios to the list of optional properties for the OV2659
> > camera sensor.
> >
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> > Documentation/devicetree/bindings/media/i2c/ov2659.txt | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov2659.txt b/Documentation/devicetree/bindings/media/i2c/ov2659.txt
> > index cabc7d827dfb..f55204cce0cd 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ov2659.txt
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov2659.txt
> > @@ -12,6 +12,10 @@ Required Properties:
> > - clock-names: should be "xvclk".
> > - link-frequencies: target pixel clock frequency.
> >
> > +Optional Properties:
> > +- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
> > + Active is low.
> > +
> as per the datasheet this should be active high with pull-down resistor.

Ahhh, yes I'll fix that.

>
> Cheers,
> --Prabhakar Lad

\
 
 \ /
  Last update: 2019-09-15 22:20    [W:0.037 / U:11.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site