lkml.org 
[lkml]   [2019]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: imx6dl: SolidRun: add phy node with 100Mb/s max-speed
On Sun, Sep 15, 2019 at 03:56:52PM +0200, Andrew Lunn wrote:
> > Tinywrkb confirmed to me in private communication that revert of
> > 5502b218e001 fixes Ethernet for him on effected system.
> >
> > He also referred me to an old Cubox-i spec that lists 10/100 Ethernet
> > only for i.MX6 Solo/DualLite variants of Cubox-i. It turns out that
> > there was a plan to use a different 10/100 PHY for Solo/DualLite
> > SOMs. This plan never materialized. All SolidRun i.MX6 SOMs use the same
> > AR8035 PHY that supports 1Gb.
> >
> > Commit 5502b218e001 might be triggering a hardware issue on the affected
> > Cubox-i. I could not reproduce the issue here with Cubox-i and a Dual
> > SOM variant running v5.3-rc8. I have no Solo/DualLite variant handy at
> > the moment.
>
> Could somebody with an affected device show us the output of ethtool
> with and without 5502b218e001. Does one show 1G has been negotiated,
> and the other 100Mbps? If this is true, how does it get 100Mbps
> without that patch? We are missing a piece of the puzzle.

Hang on. 5502b218e001 is in 5.2 already - it was merged as part of the
v5.1 merge window. That means my imx6 Solo Hummingboard is already
running it with the AR8035 PHY, and it works fine.

# dmesg
...
OF: fdt: Machine model: SolidRun HummingBoard Solo/DualLite
...
# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: d
Wake-on: d
Link detected: yes

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

\
 
 \ /
  Last update: 2019-09-15 16:07    [W:0.094 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site