[lkml]   [2019]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ARM: dts: imx6dl: SolidRun: add phy node with 100Mb/s max-speed
> Tinywrkb confirmed to me in private communication that revert of
> 5502b218e001 fixes Ethernet for him on effected system.
> He also referred me to an old Cubox-i spec that lists 10/100 Ethernet
> only for i.MX6 Solo/DualLite variants of Cubox-i. It turns out that
> there was a plan to use a different 10/100 PHY for Solo/DualLite
> SOMs. This plan never materialized. All SolidRun i.MX6 SOMs use the same
> AR8035 PHY that supports 1Gb.
> Commit 5502b218e001 might be triggering a hardware issue on the affected
> Cubox-i. I could not reproduce the issue here with Cubox-i and a Dual
> SOM variant running v5.3-rc8. I have no Solo/DualLite variant handy at
> the moment.

Could somebody with an affected device show us the output of ethtool
with and without 5502b218e001. Does one show 1G has been negotiated,
and the other 100Mbps? If this is true, how does it get 100Mbps
without that patch? We are missing a piece of the puzzle.


 \ /
  Last update: 2019-09-15 15:58    [W:0.118 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site