lkml.org 
[lkml]   [2019]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC v2 2/2] ARM: omap3: Consolidate thermal references to common omap3
On Sat, Sep 14, 2019 at 4:25 AM H. Nikolaus Schaller <hns@goldelico.com> wrote:
>
>
> > Am 13.09.2019 um 17:37 schrieb Adam Ford <aford173@gmail.com>:
> >
> > Because the omap34xx, omap36xx and am3517 SoC's have the same
> > thermal junction limits, there is no need to duplicate the entry
> > multiple times.
> >
> > This patch removes the thermal references from omap36xx and
> > omap34xx and pushes it into the common omap3.dtsi file with
> > the added benefit of enabling the thermal info on the AM3517.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>

Disregard this patch. I'll drop it based on Nikolaus' comments below.

> > ---
> > V2: Add node name for cpu and add cooling-cells entry
> >
> > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> > index 4043ecb38016..84704eb3b604 100644
> > --- a/arch/arm/boot/dts/omap3.dtsi
> > +++ b/arch/arm/boot/dts/omap3.dtsi
> > @@ -32,7 +32,7 @@
> > #address-cells = <1>;
> > #size-cells = <0>;
> >
> > - cpu@0 {
> > + cpu: cpu@0 {
> > compatible = "arm,cortex-a8";
> > device_type = "cpu";
> > reg = <0x0>;
> > @@ -41,9 +41,14 @@
> > clock-names = "cpu";
> >
> > clock-latency = <300000>; /* From omap-cpufreq driver */
> > + #cooling-cells = <2>;
> > };
> > };
>
> Looks ok.
>
> >
> > + thermal_zones: thermal-zones {
> > + #include "omap3-cpu-thermal.dtsi"
> > + };
> > +
>
> I have observed one compile issue: we also include this indirectly by am3517.dtsi
> and the included code refers to <&bandgap 0> but there is no bandgap definition in am3517.dtsi
>
> Therefore I studied the am35x TRM (SPRUGR0C) and compared to the am/dm37x TRM (SPRUGN4M).
>
> But I can't find a bandgap temperature sensor with ADC like it is described in
> "13.4.6 Band Gap Voltage and Temperature Sensor" for the am/dm37x. Only
> "BANDGAP Logic" exists in both and both have the CM_FCLKEN3_CORE but with
> different meaning of bit 0.

I didn't read the technical details, I just read there was a bandgap
logic, so I assumed it existed.

>
> There is also no description of an CONTROL_TEMP_SENSOR (0x48002524) register for am35x.
> (note: the register is also documented for omap3530).

Thanks for looking into this.

>
> So this might mean that the am35x does not have this feature unless TI simply
> did not document it because the chip is specified for a single OPP only where it
> make no sense to monitor the temperature.
>
> We can find out only by looking at 0x48002524 if there is an undocumented
> bandgap converter.

I will try to read this register when I have some time, but I have to
watch Chelsea FC play in 15 minutes. ;-)

>
> Which means we probably can't make thermal throttling work for it. And even
> if the bandgap sensor exists we are lacking an value -> celsius table.

I think it's probably best to abandon this patch, per my comment based
on all your comments.

>
>
> > pmu@54000000 {
> > compatible = "arm,cortex-a8-pmu";
> > reg = <0x54000000 0x800000>;
> > diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
> > index f572a477f74c..b80378d6e5c1 100644
> > --- a/arch/arm/boot/dts/omap34xx.dtsi
> > +++ b/arch/arm/boot/dts/omap34xx.dtsi
> > @@ -101,10 +101,6 @@
> > };
> > };
> > };
> > -
> > - thermal_zones: thermal-zones {
> > - #include "omap3-cpu-thermal.dtsi"
> > - };
> > };
> >
> > &ssi {
> > diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
> > index 6fb23ada1f64..ff2dca63a04e 100644
> > --- a/arch/arm/boot/dts/omap36xx.dtsi
> > +++ b/arch/arm/boot/dts/omap36xx.dtsi
> > @@ -140,10 +140,6 @@
> > };
> > };
> > };
> > -
> > - thermal_zones: thermal-zones {
> > - #include "omap3-cpu-thermal.dtsi"
> > - };
> > };
>
> So if we have to exclude the am3517 we can not apply the rearrangement part
> of this patch.
>
> I'd suggest to move the cpu: cpu@0 and #cooling-cells into 1/2 (also to make it
> compile stand-alone). And have the consolidation separately - if we can fix the
> am3517 bandgap sensor issue.

I'll drop this, and leave everything in the omap3-cpu-thermal file and
let omap34xx and omap36xx point to them as we do now.

>
> >
> > /* OMAP3630 needs dss_96m_fck for VENC */
> > --
> > 2.17.1
> >
>
> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # on GTA04A5 with dm3730cbp100
>

\
 
 \ /
  Last update: 2019-09-14 15:48    [W:0.101 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site