lkml.org 
[lkml]   [2019]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 08/11] PCI: layerscape: Modify the MSIX to the doorbell mode
Date


> -----Original Message-----
> From: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>
> Sent: 2019年9月12日 19:24
> To: Andrew Murray <andrew.murray@arm.com>; Xiaowei Bao
> <xiaowei.bao@nxp.com>
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: RE: [PATCH v3 08/11] PCI: layerscape: Modify the MSIX to the
> doorbell mode
>
> Hi,
>
> Sorry for the delay I was in parental leave and I'm still trying not to drown in
> the mailing list emails... 😊
>
> On Mon, Sep 2, 2019 at 13:1:47, Andrew Murray <andrew.murray@arm.com>
> wrote:
>
> > On Mon, Sep 02, 2019 at 11:17:13AM +0800, Xiaowei Bao wrote:
> > > dw_pcie_ep_raise_msix_irq was never called in the exisitng driver
> > > before, because the ls1046a platform don't support the MSIX feature
> > > and msix_capable was always set to false.
> > > Now that add the ls1088a platform with MSIX support, but the
> > > existing dw_pcie_ep_raise_msix_irq doesn't work, so use the doorbell
> > > method to support the MSIX feature.
>
> Hum... the implementation of msix implementation did work on my use case,
> however, at the time the setup used for developing and testing the
> implementation only had one PF (by default 0). Perhaps this could was is
> causing the different behavior between our setups.
>
> You have more than one PF, right?

Yes, I have two PFs.

Thanks
Xiaowei

>
> If I remember correctly, msix feature support entered on kernel 4.19 version
> and it worked quite well at the time, but I didn't test since there (I've to
> manage time to be able to retest it again), I'm didn't seen any patch that
> could interfere with this.
>
> Regards,
> Gustavo
>
>
> > >
> > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> >
> > Reviewed-by: Andrew Murray <andrew.murray@arm.com>
> >
> > > ---
> > > v2:
> > > - No change
> > > v3:
> > > - Modify the commit message make it clearly.
> > >
> > > drivers/pci/controller/dwc/pci-layerscape-ep.c | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > index 1e07287..5f0cb99 100644
> > > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > @@ -79,7 +79,8 @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep
> *ep, u8 func_no,
> > > case PCI_EPC_IRQ_MSI:
> > > return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> > > case PCI_EPC_IRQ_MSIX:
> > > - return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> > > + return dw_pcie_ep_raise_msix_irq_doorbell(ep, func_no,
> > > + interrupt_num);
> > > default:
> > > dev_err(pci->dev, "UNKNOWN IRQ type\n");
> > > return -EINVAL;
> > > --
> > > 2.9.5
> > >
>

\
 
 \ /
  Last update: 2019-09-14 08:41    [W:0.181 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site