lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 5/6] media: sun4i: Add H3 deinterlace driver
Date
Hi!

Dne petek, 13. september 2019 ob 11:11:47 CEST je Maxime Ripard napisal(a):
> Hi,
>
> On Thu, Sep 12, 2019 at 10:43:28PM +0200, Jernej Škrabec wrote:
> > Dne četrtek, 12. september 2019 ob 22:26:47 CEST je Maxime Ripard
napisal(a):
> > > > + clk_set_rate(dev->mod_clk, 300000000);
>
> I just realized I missed this too. If you really need the rate to be
> fixed, and if the controller cannot operate properly at any other
> frequency, you probably want to use clk_set_rate_exclusive there.

I don't think that's needed. Parents of deinterlace clock are pll-periph0 and
pll-periph1 which both have fixed clock and thus deinterlace clock will never
be changed. I just set it to same frequency as it is set in BSP driver. I
think it works with 600 MHz too, but that's overkill.

Best regards,
Jernej



\
 
 \ /
  Last update: 2019-09-13 22:07    [W:0.059 / U:6.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site