lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Revert "drm/bridge: adv7511: Attach to DSI host at probe time"
From
Date
On 29.08.2019 20:08, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
>
> This reverts commit 83f35bc3a852f1c3892c7474998c5cec707c7ba3.
>
> This commit the wrong direction, we should really be changing panel
> framework to attach dsi host after probe, rather than introducing
> the same probe-order problem that panels already have to bridges.
>
> The reason is, that in order to deal with devices where display is
> enabled by bootloader and efifb/simplefb is used until the real
> driver probes, we need to be careful to not touch the hardware
> until we have all the pieces probed and ready to go, otherwise you
> will kill the working display, leaving yourself (at least, in the
> case of real consumer devices that do not have a debug UART) with
> no good way to debug what went wrong.
>
> Signed-off-by: Rob Clark <robdclark@chromium.org>


Applied to drm-misc-next-fixes, with changed commit message - I hope it
is OK for you.


Regards

Andrzej


> ---
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++---------
> 1 file changed, 3 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 98bccace8c1c..f6d2681f6927 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -874,6 +874,9 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
> &adv7511_connector_helper_funcs);
> drm_connector_attach_encoder(&adv->connector, bridge->encoder);
>
> + if (adv->type == ADV7533)
> + ret = adv7533_attach_dsi(adv);
> +
> if (adv->i2c_main->irq)
> regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
> ADV7511_INT0_HPD);
> @@ -1219,17 +1222,8 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> drm_bridge_add(&adv7511->bridge);
>
> adv7511_audio_init(dev, adv7511);
> -
> - if (adv7511->type == ADV7533) {
> - ret = adv7533_attach_dsi(adv7511);
> - if (ret)
> - goto err_remove_bridge;
> - }
> -
> return 0;
>
> -err_remove_bridge:
> - drm_bridge_remove(&adv7511->bridge);
> err_unregister_cec:
> i2c_unregister_device(adv7511->i2c_cec);
> if (adv7511->cec_clk)


\
 
 \ /
  Last update: 2019-09-13 10:25    [W:0.058 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site